[PATCH 0/8] ASoC: qdsp6: db820c: Add support for external and bluetooth audio

[Adam Serbinski]

This patch set implements PCM audio support in qdsp6 and
PCM and MI2S in apq8096/db820c to enable use of bluetooth
audio codec and external MI2S port on db820c.

The db820c uses qca6174a for bluetooth, which by default
is configured to use what qualcomm refers to as "PCM"
format, which is a variation of TDM.

CC: Andy Gross <agross@xxxxxxxxxx>
CC: Mark Rutland <mark.rutland@xxxxxxx>
CC: Liam Girdwood <lgirdwood@xxxxxxxxx>
CC: Patrick Lai <plai@xxxxxxxxxxxxxx>
CC: Banajit Goswami <bgoswami@xxxxxxxxxxxxxx>
CC: Jaroslav Kysela <perex@xxxxxxxx>
CC: Takashi Iwai <tiwai@xxxxxxxx>
CC: alsa-devel@xxxxxxxxxxxxxxxx
CC: linux-arm-msm@xxxxxxxxxxxxxxx
CC: devicetree@xxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx

Adam Serbinski (8):
  ASoC: qdsp6: dt-bindings: Add q6afe pcm dt binding
  ASoC: qdsp6: q6afe: add support to pcm ports
  ASoC: qdsp6: q6afe-dai: add support to pcm port dais
  ASoC: qdsp6: q6routing: add pcm port routing
  ASoC: qcom: apq8096: add support for primary and quaternary I2S/PCM
  ASoC: qcom/common: Use snd-soc-dummy-dai when codec is not specified
  dts: msm8996/db820c: enable primary pcm and quaternary i2s
  ASoC: qcom: apq8096: add kcontrols to set PCM rate

 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 113 +++++++++
 arch/arm64/boot/dts/qcom/msm8996-pins.dtsi   | 162 ++++++++++++
 include/dt-bindings/sound/qcom,q6afe.h       |   8 +
 sound/soc/qcom/apq8096.c                     | 172 +++++++++++--
 sound/soc/qcom/common.c                      |  22 +-
 sound/soc/qcom/qdsp6/q6afe-dai.c             | 198 ++++++++++++++-
 sound/soc/qcom/qdsp6/q6afe.c                 | 246 +++++++++++++++++++
 sound/soc/qcom/qdsp6/q6afe.h                 |   9 +-
 sound/soc/qcom/qdsp6/q6routing.c             |  44 ++++
 9 files changed, 953 insertions(+), 21 deletions(-)

-- 
2.21.1