[PATCH 3.16 101/148] USB: documentation: flags on usb-storage versus UAS

[Ben Hutchings]

3.16.82-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oneukum@xxxxxxxx>

commit 65cc8bf99349f651a0a2cee69333525fe581f306 upstream.

Document which flags work storage, UAS or both

Signed-off-by: Oliver Neukum <oneukum@xxxxxxxx>
Link: https://lore.kernel.org/r/20191114112758.32747-4-oneukum@xxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
[bwh: Backported to 3.16: Drop change relating to ALWAYS_SYNC]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 .../kernel-parameters.txt         | 22 ++++++++++---------
 1 file changed, 12 insertions(+), 10 deletions(-)

--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3730,13 +3730,13 @@ bytes respectively. Such letter suffixes
 			Flags is a set of characters, each corresponding
 			to a common usb-storage quirk flag as follows:
 				a = SANE_SENSE (collect more than 18 bytes
-					of sense data);
+					of sense data, not on uas);
 				b = BAD_SENSE (don't collect more than 18
-					bytes of sense data);
+					bytes of sense data, not on uas);
 				c = FIX_CAPACITY (decrease the reported
 					device capacity by one sector);
 				d = NO_READ_DISC_INFO (don't use
-					READ_DISC_INFO command);
+					READ_DISC_INFO command, not on uas);
 				e = NO_READ_CAPACITY_16 (don't use
 					READ_CAPACITY_16 command);
 				f = NO_REPORT_OPCODES (don't use report opcodes
@@ -3751,17 +3751,18 @@ bytes respectively. Such letter suffixes
 				j = NO_REPORT_LUNS (don't use report luns
 					command, uas only);
 				l = NOT_LOCKABLE (don't try to lock and
-					unlock ejectable media);
+					unlock ejectable media, not on uas);
 				m = MAX_SECTORS_64 (don't transfer more
-					than 64 sectors = 32 KB at a time);
+					than 64 sectors = 32 KB at a time,
+					not on uas);
 				n = INITIAL_READ10 (force a retry of the
-					initial READ(10) command);
+					initial READ(10) command, not on uas);
 				o = CAPACITY_OK (accept the capacity
-					reported by the device);
+					reported by the device, not on uas);
 				p = WRITE_CACHE (the device cache is ON
-					by default);
+					by default, not on uas);
 				r = IGNORE_RESIDUE (the device reports
-					bogus residue values);
+					bogus residue values, not on uas);
 				s = SINGLE_LUN (the device has only one
 					Logical Unit);
 				t = NO_ATA_1X (don't allow ATA(12) and ATA(16)