[PATCH 3.16 058/148] USB: serial: mos7840: add USB ID to support Moxa UPort 2210

[Ben Hutchings]

3.16.82-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel LÃbl <pavel@xxxxxxxx>

commit e696d00e65e81d46e911f24b12e441037bf11b38 upstream.

Add USB ID for MOXA UPort 2210. This device contains mos7820 but
it passes GPIO0 check implemented by driver and it's detected as
mos7840. Hence product id check is added to force mos7820 mode.

Signed-off-by: Pavel LÃbl <pavel@xxxxxxxx>
[ johan: rename id defines and add vendor-id check ]
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 drivers/usb/serial/mos7840.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -131,11 +131,15 @@
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840
  * ATEN UC2322 device using Moschip MCS7820
+ * MOXA UPort 2210 device using Moschip MCS7820
  */
 #define USB_VENDOR_ID_ATENINTL		0x0557
 #define ATENINTL_DEVICE_ID_UC2324	0x2011
 #define ATENINTL_DEVICE_ID_UC2322	0x7820
 
+#define USB_VENDOR_ID_MOXA		0x110a
+#define MOXA_DEVICE_ID_2210		0x2210
+
 /* Interrupt Routine Defines    */
 
 #define SERIAL_IIR_RLS      0x06
@@ -206,6 +210,7 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
+	{USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)},
 	{}			/* terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -2139,6 +2144,7 @@ static int mos7840_probe(struct usb_seri
 				const struct usb_device_id *id)
 {
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+	u16 vid = le16_to_cpu(serial->dev->descriptor.idVendor);
 	u8 *buf;
 	int device_type;
 
@@ -2148,6 +2154,11 @@ static int mos7840_probe(struct usb_seri
 		goto out;
 	}
 
+	if (vid == USB_VENDOR_ID_MOXA && product == MOXA_DEVICE_ID_2210) {
+		device_type = MOSCHIP_DEVICE_ID_7820;
+		goto out;
+	}
+
 	buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;