On Thu, Jan 9, 2020 at 8:33 PM David Dai <daidavid1@xxxxxxxxxxxxxx> wrote:
Add the DT nodes for each of the Network-On-Chip interconnect
buses found on SDM845 based platform and redefine the rsc_hlos
child node as a bcm-voter device to better represent the hardware.
Signed-off-by: David Dai <daidavid1@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 61 ++++++++++++++++++++++++++++++++++--
1 file changed, 58 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ddb1f23..7c617a9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1364,6 +1364,55 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ mem_noc: interconnect@1380000 {
+ compatible = "qcom,sdm845-mem-noc";
+ reg = <0 0x01380000 0 0x27200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ dc_noc: interconnect@14e0000 {
+ compatible = "qcom,sdm845-dc-noc";
+ reg = <0 0x014e0000 0 0x400>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,sdm845-config-noc";
+ reg = <0 0x01500000 0 0x5080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1620000 {
+ compatible = "qcom,sdm845-system-noc";
+ reg = <0 0x01620000 0 0x18080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sdm845-aggre1-noc";
+ reg = <0 0x016e0000 0 0xd080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,sdm845-aggre2-noc";
+ reg = <0 0x01700000 0 0x3b100>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ compatible = "qcom,sdm845-mmss-noc";
+ reg = <0 0x01740000 0 0x1c1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -3100,6 +3149,13 @@
#mbox-cells = <1>;
};
+ gladiator_noc: interconnect@17900000 {
+ compatible = "qcom,sdm845-gladiator-noc";
+ reg = <0 0x17900000 0 0xd080>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
apps_rsc: rsc@179c0000 {
label = "apps_rsc";
compatible = "qcom,rpmh-rsc";
@@ -3174,9 +3230,8 @@
};
};
- rsc_hlos: interconnect {
- compatible = "qcom,sdm845-rsc-hlos";
- #interconnect-cells = <1>;
With this reworking of the bindings the examples in these files are now broken:
Documentation/devicetree/bindings/display/msm/gpu.txt
Documentation/devicetree/bindings/display/msm/dpu.txt
It would be nice to fix them up in a subsequent change.
-Evan