[RFC PATCH 1/3] dt_bindings: ROHM BD99954 Charger

[Matti Vaittinen]

The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
secondary battery. Intended to be used in space-constraint equipment such
as Low profile Notebook PC, Tablets and other applications. BD99954
provides a Dual-source Battery Charger, two port BC1.2 detection and a
Battery Monitor.

Document the DT bindings for BD99954

Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
---
I think these properties could probably be generic and not
vendor specific, right? If so, then I could try adding parser
function(s) for them in power/supply framework. How do you
guys see this?

 .../bindings/power/supply/rohm,bd9995x.yaml   | 118 ++++++++++++++++++
 1 file changed, 118 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml

diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml
new file mode 100644
index 000000000000..ba9fe1dc3f2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd9995x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger driver
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
+  - Markus Laine <markus.laine@xxxxxxxxxxxxxxxxx>
+  - Mikko Mutanen <mikko.mutanen@xxxxxxxxxxxxxxxxx>
+
+description: |
+  The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+  secondary battery intended to be used in space-constraint equipment such
+  as Low profile Notebook PC, Tablets and other applications. BD99954
+  provides a Dual-source Battery Charger, two port BC1.2 detection and a
+  Battery Monitor.
+
+properties:
+  compatible:
+    const: rohm,bd9995x-charger
+
+  rohm,vbus-input-current-limit-microamp:
+    description:
+      system specific VBUS input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+  rohm,vcc-input-current-limit-microamp:
+    description:
+      system specific VCC/VACP input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+  rohm,trickle-charging-current-microamp:
+    description:
+      battery specific value for trickle-charging current.
+    minimum: 64000
+    maximum: 1024000
+    multipleOf: 64000
+
+  rohm,pre-charging-current-microamp:
+    description:
+      battery specific value for pre-charging current.
+    minimum: 64000
+    maximum: 1024000
+    multipleOf: 64000
+
+  rohm,fast-charging-regulation-microvolt:
+    description:
+      battery/system specific upper limit for battry/system voltage.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 16000
+
+  rohm,vsys-regulation-microvolt:
+    description:
+      system specific lower limit for system voltage.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 64000
+
+  rohm,pre-charge-voltage-threshold-microvolt:
+    description:
+      voltage limit for changing from trickle to pre-charging.
+    minimum: 2048000
+    maximum: 19200000
+    multipleOf: 64000
+
+  rohm,re-charge-battery-voltage-microvolt:
+    description:
+      voltage limit for automatically re-starting the battery charging.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 16000
+
+  rohm,battery-over-voltage-threshold-microvolt:
+    description:
+      voltage limit for detecting battery over voltage.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 16000
+
+required:
+  - compatible
+  - rohm,vbus-input-current-limit-microamp
+  - rohm,vcc-input-current-limit-microamp
+  - rohm,trickle-charging-current-microamp
+  - rohm,pre-charging-current-microamp
+  - rohm,fast-charging-regulation-microvolt
+  - rohm,vsys-regulation-microvolt
+  - rohm,pre-charge-voltage-threshold-microvolt
+  - rohm,re-charge-battery-voltage-microvolt
+  - rohm,battery-over-voltage-threshold-microvolt
+
+examples:
+  - |
+    i2c {
+        charger@9 {
+            compatible = "rohm,bd9995x-charger";
+            reg = <0x9>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 8>;
+            rohm,vsys-regulation-microvolt = <8960000>;
+            rohm,vbus-input-current-limit-microamp = <1472000>;
+            rohm,vcc-input-current-limit-microamp = <1472000>;
+            rohm,trickle-charging-current-microamp = <256000>;
+            rohm,pre-charging-current-microamp = <256000>;
+            rohm,fast-charging-regulation-microvolt = <8400000>;
+            rohm,pre-charge-voltage-threshold-microvolt = <2048000>;
+            rohm,re-charge-battery-voltage-microvolt = <8112000>;
+            rohm,battery-over-voltage-threshold-microvolt = <8912000>;
+        };
+    };
-- 
2.21.0


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]