[PATCH] perf/smmuv3: Use platform_get_irq_optional() for wired interrupt

[John Garry]

Even though a SMMUv3 PMCG implementation may use an MSI as the form of
interrupt source, the kernel would still complain that it does not find
the wired (GSIV) interrupt in this case:

root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found"
[   59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found
[   59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found
[   59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found
[   59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found
[   59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found
[   59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found
[   59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found
[   60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found

Use platform_get_irq_optional() to silence the warning.

If neither interrupt source is found, then the driver will still warn that
IRQ setup errored and the probe will fail.

Signed-off-by: John Garry <john.garry@xxxxxxxxxx>

diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
index d704eccc548f..f01a57e5a5f3 100644
--- a/drivers/perf/arm_smmuv3_pmu.c
+++ b/drivers/perf/arm_smmuv3_pmu.c
@@ -771,7 +771,7 @@ static int smmu_pmu_probe(struct platform_device *pdev)
 		smmu_pmu->reloc_base = smmu_pmu->reg_base;
 	}
 
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_optional(pdev, 0);
 	if (irq > 0)
 		smmu_pmu->irq = irq;
 
-- 
2.17.1