Re: [PATCH v3 2/2] remoteproc: qcom_q6v5_mss: Validate each segment during loading

From: Mathieu Poirier
Date: Mon Feb 10 2020 - 18:10:19 EST

Next message: Daniel Rosenberg: "Re: [PATCH v7 2/8] fs: Add standard casefolding support"
Previous message: Jules Irenge: "Re: [PATCH 00/11] Lock warning cleanup"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Feb 03, 2020 at 10:26:41PM -0800, Bjorn Andersson wrote:
> The code used to sync with the MBA after each segment loaded and this is
> still what's done downstream. So reduce the delta towards downstream by
> switching to a model where the content is iteratively validated.
>
> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
> Tested-by: Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>
> Tested-by: Luca Weiss <luca@xxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Enough people have looked at this and I won't add my two-bits other then
checkpatch is complaining about lines over 80 characters. In this case they are
easy to fix and have no side effects.

Mathieu

> ---
>
> Changes since v2:
> - Picked up Luca's t-b
>
> drivers/remoteproc/qcom_q6v5_mss.c | 76 ++++++++++++++++++++----------
> 1 file changed, 51 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 25c03a26bf88..5eb154f221a4 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -360,23 +360,29 @@ static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds,
> }
>
> static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
> - bool remote_owner, phys_addr_t addr,
> + bool local, bool remote, phys_addr_t addr,
> size_t size)
> {
> - struct qcom_scm_vmperm next;
> + struct qcom_scm_vmperm next[2];
> + int perms = 0;
>
> if (!qproc->need_mem_protection)
> return 0;
> - if (remote_owner && *current_perm == BIT(QCOM_SCM_VMID_MSS_MSA))
> - return 0;
> - if (!remote_owner && *current_perm == BIT(QCOM_SCM_VMID_HLOS))
> - return 0;
>
> - next.vmid = remote_owner ? QCOM_SCM_VMID_MSS_MSA : QCOM_SCM_VMID_HLOS;
> - next.perm = remote_owner ? QCOM_SCM_PERM_RW : QCOM_SCM_PERM_RWX;
> + if (local) {
> + next[perms].vmid = QCOM_SCM_VMID_HLOS;
> + next[perms].perm = QCOM_SCM_PERM_RWX;
> + perms++;
> + }
> +
> + if (remote) {
> + next[perms].vmid = QCOM_SCM_VMID_MSS_MSA;
> + next[perms].perm = QCOM_SCM_PERM_RW;
> + perms++;
> + }
>
> return qcom_scm_assign_mem(addr, ALIGN(size, SZ_4K),
> - current_perm, &next, 1);
> + current_perm, next, perms);
> }
>
> static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
> @@ -693,7 +699,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
>
> /* Hypervisor mapping to access metadata by modem */
> mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
> - ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, phys, size);
> + ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, true, phys, size);
> if (ret) {
> dev_err(qproc->dev,
> "assigning Q6 access to metadata failed: %d\n", ret);
> @@ -711,7 +717,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
> dev_err(qproc->dev, "MPSS header authentication failed: %d\n", ret);
>
> /* Metadata authentication done, remove modem access */
> - xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, phys, size);
> + xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, false, phys, size);
> if (xferop_ret)
> dev_warn(qproc->dev,
> "mdt buffer not reclaimed system may become unstable\n");
> @@ -798,7 +804,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> }
>
> /* Assign MBA image access in DDR to q6 */
> - ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
> + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false, true,
> qproc->mba_phys, qproc->mba_size);
> if (ret) {
> dev_err(qproc->dev,
> @@ -832,8 +838,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
>
> reclaim_mba:
> - xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
> - qproc->mba_phys,
> + xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
> + false, qproc->mba_phys,
> qproc->mba_size);
> if (xfermemop_ret) {
> dev_err(qproc->dev,
> @@ -900,7 +906,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
> /* In case of failure or coredump scenario where reclaiming MBA memory
> * could not happen reclaim it here.
> */
> - ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
> + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false,
> qproc->mba_phys,
> qproc->mba_size);
> WARN_ON(ret);
> @@ -927,6 +933,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> phys_addr_t boot_addr;
> phys_addr_t min_addr = PHYS_ADDR_MAX;
> phys_addr_t max_addr = 0;
> + u32 code_length;
> bool relocate = false;
> char *fw_name;
> size_t fw_name_len;
> @@ -977,9 +984,19 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> }
>
> /* Try to reset ownership back to Linux */
> - q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
> + q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false,
> qproc->mpss_phys, qproc->mpss_size);
>
> + /* Share ownership between Linux and MSS, during segment loading */
> + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, true,
> + qproc->mpss_phys, qproc->mpss_size);
> + if (ret) {
> + dev_err(qproc->dev,
> + "assigning Q6 access to mpss memory failed: %d\n", ret);
> + ret = -EAGAIN;
> + goto release_firmware;
> + }
> +
> mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
> qproc->mpss_reloc = mpss_reloc;
> /* Load firmware segments */
> @@ -1028,10 +1045,24 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> phdr->p_memsz - phdr->p_filesz);
> }
> size += phdr->p_memsz;
> +
> + code_length = readl(qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> + if (!code_length) {
> + boot_addr = relocate ? qproc->mpss_phys : min_addr;
> + writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
> + writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
> + }
> + writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> +
> + ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
> + if (ret < 0) {
> + dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret);
> + goto release_firmware;
> + }
> }
>
> /* Transfer ownership of modem ddr region to q6 */
> - ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true,
> + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
> qproc->mpss_phys, qproc->mpss_size);
> if (ret) {
> dev_err(qproc->dev,
> @@ -1040,11 +1071,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> goto release_firmware;
> }
>
> - boot_addr = relocate ? qproc->mpss_phys : min_addr;
> - writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
> - writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
> - writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> -
> ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
> if (ret == -ETIMEDOUT)
> dev_err(qproc->dev, "MPSS authentication timed out\n");
> @@ -1074,7 +1100,7 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
> if (!ret) {
> /* Try to reset ownership back to Linux */
> ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
> - false,
> + true, false,
> qproc->mpss_phys,
> qproc->mpss_size);
> }
> @@ -1116,8 +1142,8 @@ static int q6v5_start(struct rproc *rproc)
> goto reclaim_mpss;
> }
>
> - xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
> - qproc->mba_phys,
> + xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
> + false, qproc->mba_phys,
> qproc->mba_size);
> if (xfermemop_ret)
> dev_err(qproc->dev,
> --
> 2.23.0
>

Next message: Daniel Rosenberg: "Re: [PATCH v7 2/8] fs: Add standard casefolding support"
Previous message: Jules Irenge: "Re: [PATCH 00/11] Lock warning cleanup"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]