[PATCH v3 5/8] arm64: dts: qcom: sdm845: Add IMEM and PIL info region

[Bjorn Andersson]

Add a simple-mfd representing IMEM on SDM845 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

Changes since v2:
- Replace offset with reg

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d42302b8889b..3443d989976c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3018,6 +3018,19 @@ spmi_bus: spmi@c440000 {
 			cell-index = <0>;
 		};
 
+		imem@146bf000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0 0x146bf000 0 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible ="qcom,pil-reloc-info";
+				reg = <0x94c 200>;
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
-- 
2.24.0