[PATCH v1 2/2] clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk

[Taniya Das]

The disp_cc_mdss_rscc_ahb_clk is default enabled from hardware and thus
does not require to be marked CRITICAL. This which would allow the RCG to
be turned OFF when the display turns OFF and not blocking XO.

Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
---
 drivers/clk/qcom/dispcc-sc7180.c | 19 -------------------
 1 file changed, 19 deletions(-)

diff --git a/drivers/clk/qcom/dispcc-sc7180.c b/drivers/clk/qcom/dispcc-sc7180.c
index dd7af41..0a5d395 100644
--- a/drivers/clk/qcom/dispcc-sc7180.c
+++ b/drivers/clk/qcom/dispcc-sc7180.c
@@ -592,24 +592,6 @@ static struct clk_branch disp_cc_mdss_rot_clk = {
 	},
 };

-static struct clk_branch disp_cc_mdss_rscc_ahb_clk = {
-	.halt_reg = 0x400c,
-	.halt_check = BRANCH_HALT,
-	.clkr = {
-		.enable_reg = 0x400c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "disp_cc_mdss_rscc_ahb_clk",
-			.parent_data = &(const struct clk_parent_data){
-				.hw = &disp_cc_mdss_ahb_clk_src.clkr.hw,
-			},
-			.num_parents = 1,
-			.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch disp_cc_mdss_rscc_vsync_clk = {
 	.halt_reg = 0x4008,
 	.halt_check = BRANCH_HALT,
@@ -687,7 +669,6 @@ static struct clk_regmap *disp_cc_sc7180_clocks[] = {
 	[DISP_CC_MDSS_PCLK0_CLK_SRC] = &disp_cc_mdss_pclk0_clk_src.clkr,
 	[DISP_CC_MDSS_ROT_CLK] = &disp_cc_mdss_rot_clk.clkr,
 	[DISP_CC_MDSS_ROT_CLK_SRC] = &disp_cc_mdss_rot_clk_src.clkr,
-	[DISP_CC_MDSS_RSCC_AHB_CLK] = &disp_cc_mdss_rscc_ahb_clk.clkr,
 	[DISP_CC_MDSS_RSCC_VSYNC_CLK] = &disp_cc_mdss_rscc_vsync_clk.clkr,
 	[DISP_CC_MDSS_VSYNC_CLK] = &disp_cc_mdss_vsync_clk.clkr,
 	[DISP_CC_MDSS_VSYNC_CLK_SRC] = &disp_cc_mdss_vsync_clk_src.clkr,
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.