Re: [linux-sunxi] [PATCH 0/8] media: sunxi: Add DE2 rotate driver
From: Jernej Åkrabec
Date: Tue Feb 11 2020 - 14:13:05 EST
Dne sobota, 25. januar 2020 ob 00:20:06 CET je Jernej Skrabec napisal(a):
> Some of Allwinner SoCs like A83T and A64 SoCs contain DE2 rotate core
> which can flip image horizontal and vertical and rotate it in 90 deg.
> steps. It support a lot of output formats, but a bit less capture
> formats. All YUV input formats get converted to yuv420p, while RGB
> formats are preserved.
>
> Patches 1-2 fix few issues with DE2 clocks.
>
> Patches 3-4 fix register range of DE2 clocks (it would overlap with
> rotate driver)
>
> Patches 5-8 provide binding, implement driver and add nodes.
>
> v4l2-compliance SHA: ec55a961487b449bedbe07650674b4965814cf07, 32 bits,
> 32-bit time_t
>
> Compliance test for sun8i-rotate device /dev/video0:
>
> Driver Info:
> Driver name : sun8i-rotate
> Card type : sun8i-rotate
> Bus info : platform:sun8i-rotate
> Driver version : 5.5.0
> Capabilities : 0x84208000
> Video Memory-to-Memory
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04208000
> Video Memory-to-Memory
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> test invalid ioctls: OK
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 4 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Total for sun8i-rotate device /dev/video0: 45, Succeeded: 45, Failed: 0,
> Warnings: 0
>
> Best regards,
> Jernej
>
> Jernej Skrabec (8):
> clk: sunxi-ng: sun8i-de2: Swap A64 and H6 definitions
> clk: sunxi-ng: sun8i-de2: Fix A83T clocks and reset
Please disregard above two patches. It turns out that many more changes are
required to fix mess with rotation clocks and reset. I sent separate patch
series: http://lists.infradead.org/pipermail/linux-arm-kernel/2020-February/
710242.html
Comments on the rest of the series are welcome, though.
Best regards,
Jernej
> ARM: dts: sunxi: Fix DE2 clocks register range
> arm64: dts: allwinner: a64: Fix display clock register range
> media: dt-bindings: media: Add Allwinner A83T Rotate driver
> media: sun8i: Add Allwinner A83T Rotate driver
> ARM: dts: sun8i: a83t: Add device node for rotation core
> arm64: dts: allwinner: a64: add node for rotation core
>
> .../allwinner,sun8i-a83t-de2-rotate.yaml | 70 ++
> MAINTAINERS | 8 +
> arch/arm/boot/dts/sun8i-a83t.dtsi | 13 +-
> arch/arm/boot/dts/sun8i-r40.dtsi | 2 +-
> arch/arm/boot/dts/sun8i-v3s.dtsi | 2 +-
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 14 +-
> drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 49 +-
> drivers/media/platform/Kconfig | 12 +
> drivers/media/platform/sunxi/Makefile | 1 +
> .../platform/sunxi/sun8i-rotate/Makefile | 2 +
> .../sunxi/sun8i-rotate/sun8i-formats.c | 273 ++++++
> .../sunxi/sun8i-rotate/sun8i-formats.h | 25 +
> .../sunxi/sun8i-rotate/sun8i-rotate.c | 924 ++++++++++++++++++
> .../sunxi/sun8i-rotate/sun8i-rotate.h | 135 +++
> 15 files changed, 1512 insertions(+), 20 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yam
> l create mode 100644 drivers/media/platform/sunxi/sun8i-rotate/Makefile
> create mode 100644
> drivers/media/platform/sunxi/sun8i-rotate/sun8i-formats.c create mode
> 100644 drivers/media/platform/sunxi/sun8i-rotate/sun8i-formats.h create
> mode 100644 drivers/media/platform/sunxi/sun8i-rotate/sun8i-rotate.c create
> mode 100644 drivers/media/platform/sunxi/sun8i-rotate/sun8i-rotate.h