[PATCH 15/28] x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*()

From: Rafael J. Wysocki
Date: Tue Feb 11 2020 - 18:38:59 EST


From: "Rafael J. Wysocki" <rafael.j.wysocki@xxxxxxxxx>

Call cpu_latency_qos_add/update/remove_request() instead of
pm_qos_add/update/remove_request(), respectively, because the
latter are going to be dropped.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
---
arch/x86/platform/intel/iosf_mbi.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/x86/platform/intel/iosf_mbi.c b/arch/x86/platform/intel/iosf_mbi.c
index 9e2444500428..526f70f27c1c 100644
--- a/arch/x86/platform/intel/iosf_mbi.c
+++ b/arch/x86/platform/intel/iosf_mbi.c
@@ -265,7 +265,7 @@ static void iosf_mbi_reset_semaphore(void)
iosf_mbi_sem_address, 0, PUNIT_SEMAPHORE_BIT))
dev_err(&mbi_pdev->dev, "Error P-Unit semaphore reset failed\n");

- pm_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
+ cpu_latency_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);

blocking_notifier_call_chain(&iosf_mbi_pmic_bus_access_notifier,
MBI_PMIC_BUS_ACCESS_END, NULL);
@@ -301,8 +301,8 @@ static void iosf_mbi_reset_semaphore(void)
* 4) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC
* if this happens while the kernel itself is accessing the PMIC I2C bus
* the SoC hangs.
- * As the third step we call pm_qos_update_request() to disallow the CPU
- * to enter C6 or C7.
+ * As the third step we call cpu_latency_qos_update_request() to disallow the
+ * CPU to enter C6 or C7.
*
* 5) The P-Unit has a PMIC bus semaphore which we can request to stop
* autonomous P-Unit tasks from accessing the PMIC I2C bus while we hold it.
@@ -338,7 +338,7 @@ int iosf_mbi_block_punit_i2c_access(void)
* requires the P-Unit to talk to the PMIC and if this happens while
* we're holding the semaphore, the SoC hangs.
*/
- pm_qos_update_request(&iosf_mbi_pm_qos, 0);
+ cpu_latency_qos_update_request(&iosf_mbi_pm_qos, 0);

/* host driver writes to side band semaphore register */
ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
@@ -547,8 +547,7 @@ static int __init iosf_mbi_init(void)
{
iosf_debugfs_init();

- pm_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_DEFAULT_VALUE);
+ cpu_latency_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);

return pci_register_driver(&iosf_mbi_pci_driver);
}
@@ -561,7 +560,7 @@ static void __exit iosf_mbi_exit(void)
pci_dev_put(mbi_pdev);
mbi_pdev = NULL;

- pm_qos_remove_request(&iosf_mbi_pm_qos);
+ cpu_latency_qos_remove_request(&iosf_mbi_pm_qos);
}

module_init(iosf_mbi_init);
--
2.16.4