[PATCH v3 6/6] ASoC: qdsp6: dt-bindings: Add q6afe pcm dt binding documentation

[Adam Serbinski]

This patch adds documentation of bindings required for PCM ports on AFE.

Signed-off-by: Adam Serbinski <adam@xxxxxxxxxxxxx>
CC: Andy Gross <agross@xxxxxxxxxx>
CC: Mark Rutland <mark.rutland@xxxxxxx>
CC: Liam Girdwood <lgirdwood@xxxxxxxxx>
CC: Patrick Lai <plai@xxxxxxxxxxxxxx>
CC: Banajit Goswami <bgoswami@xxxxxxxxxxxxxx>
CC: Jaroslav Kysela <perex@xxxxxxxx>
CC: Takashi Iwai <tiwai@xxxxxxxx>
CC: alsa-devel@xxxxxxxxxxxxxxxx
CC: linux-arm-msm@xxxxxxxxxxxxxxx
CC: devicetree@xxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx
---
 .../devicetree/bindings/sound/qcom,q6afe.txt  | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index d74888b9f1bb..6b1b17d31a2a 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -51,6 +51,24 @@ configuration of each dai. Must contain the following properties.
 	Definition: Must be list of serial data lines used by this dai.
 	should be one or more of the 0-3 sd lines.
 
+ - qcom,pcm-quantype
+	Usage: required for pcm interface
+	Value type: <u32>
+	Definition: PCM quantization type
+		0 - ALAW, no padding
+		1 - MULAW, no padding
+		2 - Linear, no padding
+		3 - ALAW, padding
+		4 - MULAW, padding
+		5 - Linear, padding
+
+ - qcom,pcm-slot-mapping
+	Usage: required for pcm interface
+	Value type: <prop-encoded-array>
+	Definition: Slot mapping for audio channels. Array size is the number
+		of slots, minimum 1, maximum 4. The value is 0 for no mapping
+		to the slot, or the channel number from 1 to 32.
+
  - qcom,tdm-sync-mode:
 	Usage: required for tdm interface
 	Value type: <prop-encoded-array>
@@ -174,5 +192,29 @@ q6afe@4 {
 			reg = <23>;
 			qcom,sd-lines = <1>;
 		};
+
+		pri-pcm-rx@105 {
+			reg = <105>;
+			qcom,pcm-quantype = <2>;
+			qcom,pcm-slot-mapping = <1>;
+		};
+
+		pri-pcm-tx@106 {
+			reg = <106>;
+			qcom,pcm-quantype = <2>;
+			qcom,pcm-slot-mapping = <1>;
+		};
+
+		quat-pcm-rx@111 {
+			reg = <111>;
+			qcom,pcm-quantype = <5>;
+			qcom,pcm-slot-mapping = <0 0 1>;
+		};
+
+		quat-pcm-tx@112 {
+			reg = <112>;
+			qcom,pcm-quantype = <5>;
+			qcom,pcm-slot-mapping = <0 0 1>;
+		};
 	};
 };
-- 
2.21.1