RE: [PATCH V6 0/4] Add Xilinx's ZynqMP AES-GCM driver support

[Kalyani Akula]

Hi Herbert,

When can we expect this patch-set to be merged.

Regards,
Kalyani

> -----Original Message-----
> From: Kalyani Akula <kalyani.akula@xxxxxxxxxx>
> Sent: Tuesday, January 28, 2020 11:48 AM
> To: herbert@xxxxxxxxxxxxxxxxxxx; davem@xxxxxxxxxxxxx;
> monstr@xxxxxxxxx; linux-crypto@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; git-dev
> <git-dev@xxxxxxxxxx>; Mohan Marutirao Dhanawade
> <mohand@xxxxxxxxxx>; Sarat Chand Savitala <saratcha@xxxxxxxxxx>; Harsh
> Jain <harshj@xxxxxxxxxx>; Michal Simek <michals@xxxxxxxxxx>; Kalyani Akula
> <kalyania@xxxxxxxxxx>; Kalyani Akula <kalyania@xxxxxxxxxx>
> Subject: [PATCH V6 0/4] Add Xilinx's ZynqMP AES-GCM driver support
> 
> This patch set adds support for
> - dt-binding docs for Xilinx ZynqMP AES driver
> - Adds device tree node for ZynqMP AES driver
> - Adds communication layer support for aes in zynqmp.c
> - Adds Xilinx ZynqMP driver for AES Algorithm
> 
> NOTE: This patchset is based on Michal's branch
> https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/log/?h=arm/driv
> ers
> because of possible merge conflict for 1/4 patch with below commit commit
> 461011b1e1ab ("drivers: firmware: xilinx: Add support for feature check")
> 
> V6 Changes:
> - Updated SPDX-License-Identifier in xlnx,zynqmp-aes.yaml.
> 
> V5 Changes :
> - Moved arm64: zynqmp: Add Xilinx AES node from 2/4 to 4/4.
> - Moved crypto: Add Xilinx AES driver patch from 4/4 to 3/4.
> - Moved dt-bindings patch from 1/4 to 2/4
> - Moved firmware: xilinx: Add ZynqMP aes API for AES patch from 3/4 to 1/4
> - Converted dt-bindings from .txt to .yaml format.
> - Corrected typo in the subject.
> - Updated zynqmp-aes node to correct location.
> - Replaced ARCH_ZYNQMP with ZYNQMP_FIRMWARE in Kconfig
> - Removed extra new lines and added wherever necessary.
> - Updated Signed-off-by sequence.
> - Ran checkpatch for all patches in the series.
> 
> V4 Changes :
> - Addressed review comments.
> 
> V3 Changes :
> - Added software fallback in cases where Hardware doesn't have
>   the capability to handle the request.
> - Removed use of global variable for storing the driver data.
> - Enabled CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and executed all
>   the kernel selftests. Also covered tests with tcrypt module.
> 
> V2 Changes :
> - Converted RFC PATCH to PATCH
> - Removed ALG_SET_KEY_TYPE that was added to support keytype
>   attribute. Taken using setkey interface.
> - Removed deprecated BLKCIPHER in Kconfig
> - Erased Key/IV from the buffer.
> - Renamed zynqmp-aes driver to zynqmp-aes-gcm.
> - Addressed few other review comments
> 
> 
> Kalyani Akula (4):
>   firmware: xilinx: Add ZynqMP aes API for AES functionality
>   dt-bindings: crypto: Add bindings for ZynqMP AES-GCM driver
>   crypto: Add Xilinx AES driver
>   arm64: zynqmp: Add Xilinx AES node.
> 
>  .../bindings/crypto/xlnx,zynqmp-aes.yaml           |  37 ++
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi             |   4 +
>  drivers/crypto/Kconfig                             |  12 +
>  drivers/crypto/Makefile                            |   1 +
>  drivers/crypto/xilinx/Makefile                     |   2 +
>  drivers/crypto/xilinx/zynqmp-aes-gcm.c             | 466
> +++++++++++++++++++++
>  drivers/firmware/xilinx/zynqmp.c                   |  25 ++
>  include/linux/firmware/xlnx-zynqmp.h               |   2 +
>  8 files changed, 549 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
>  create mode 100644 drivers/crypto/xilinx/Makefile  create mode 100644
> drivers/crypto/xilinx/zynqmp-aes-gcm.c
> 
> --
> 1.9.5