[PATCH net v2] net: ethernet: ave: Add capability of rgmii-id mode

[Kunihiko Hayashi]

This allows you to specify the type of rgmii-id that will enable phy
internal delay in ethernet phy-mode.

This adds all RGMII cases to all of get_pinmode() except LD11, because LD11
SoC doesn't support RGMII due to the constraint of the hardware. When RGMII
phy mode is specified in the devicetree for LD11, the driver will abort
with an error.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
---
Changes since v1:
- Add description about LD11 to the commit message

 drivers/net/ethernet/socionext/sni_ave.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c
index b703242..67ddf78 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -1810,6 +1810,9 @@ static int ave_pro4_get_pinmode(struct ave_private *priv,
 		break;
 	case PHY_INTERFACE_MODE_MII:
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
 		priv->pinmode_val = 0;
 		break;
 	default:
@@ -1854,6 +1857,9 @@ static int ave_ld20_get_pinmode(struct ave_private *priv,
 		priv->pinmode_val = SG_ETPINMODE_RMII(0);
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
 		priv->pinmode_val = 0;
 		break;
 	default:
@@ -1876,6 +1882,9 @@ static int ave_pxs3_get_pinmode(struct ave_private *priv,
 		priv->pinmode_val = SG_ETPINMODE_RMII(arg);
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
 		priv->pinmode_val = 0;
 		break;
 	default:
-- 
2.7.4