Re: [PATCH v4 2/6] PCI: rcar: Fix calculating mask for PCIEPAMR register

[Bjorn Helgaas]

On Sat, Feb 08, 2020 at 06:36:37PM +0000, Lad Prabhakar wrote:
> The mask value was calculated incorrectly for PCIEPAMR register if the
> size was less the 128bytes, this patch fixes the above by adding a check
> on size.

s/less the/less than/
s/128bytes,/128 bytes./
s/this patch fixes the above/Fix this issue/

> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  drivers/pci/controller/pcie-rcar.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
> index d5568db..c76a92a 100644
> --- a/drivers/pci/controller/pcie-rcar.c
> +++ b/drivers/pci/controller/pcie-rcar.c
> @@ -71,7 +71,7 @@ void rcar_pcie_set_outbound(int win, void __iomem *base,
>  	/* Setup PCIe address space mappings for each resource */
>  	resource_size_t res_start;
>  	resource_size_t size;
> -	u32 mask;
> +	u32 mask = 0x0;
>  
>  	rcar_pci_write_reg(base, 0x00000000, PCIEPTCTLR(win));
>  
> @@ -80,7 +80,8 @@ void rcar_pcie_set_outbound(int win, void __iomem *base,
>  	 * keeps things pretty simple.
>  	 */
>  	size = resource_size(res);
> -	mask = (roundup_pow_of_two(size) / SZ_128) - 1;
> +	if (size > 128)
> +		mask = (roundup_pow_of_two(size) / SZ_128) - 1;

I would put the "mask = 0x0" right here so it's all in one place,
i.e.,

  if (size > 128)
    mask = (roundup_pow_of_two(size) / SZ_128) - 1;
  else
    mask = 0x0;

>  	rcar_pci_write_reg(base, mask << 7, PCIEPAMR(win));
>  
>  	if (!host) {
> -- 
> 2.7.4
>