Re: [PATCH v2 02/16] bus: mhi: core: Add support for registering MHI controllers

[Greg KH]

On Thu, Feb 13, 2020 at 08:50:13PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Feb 11, 2020 at 11:20:55AM -0800, Greg KH wrote:
> > On Wed, Feb 12, 2020 at 12:11:30AM +0530, Manivannan Sadhasivam wrote:
> > > Hi Greg,
> > > 
> > > On Thu, Feb 06, 2020 at 05:57:55PM +0100, Greg KH wrote:
> > > > On Fri, Jan 31, 2020 at 07:19:55PM +0530, Manivannan Sadhasivam wrote:
> > > > > --- /dev/null
> > > > > +++ b/drivers/bus/mhi/core/init.c
> > > > > @@ -0,0 +1,407 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > +/*
> > > > > + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
> > > > > + *
> > > > > + */
> > > > > +
> > > > > +#define dev_fmt(fmt) "MHI: " fmt
> > > > 
> > > > This should not be needed, right?  The bus/device name should give you
> > > > all you need here from what I can tell.  So why is this needed?
> > > > 
> > > 
> > > The log will have only the device name as like PCI-E. But that won't specify
> > > where the error is coming from. Having "MHI" prefix helps the users to
> > > quickly identify that the error is coming from MHI stack.
> > 
> > If the driver binds properly to the device, the name of the driver will
> > be there in the message, so I suggest using that please.
> > 
> > No need for this prefix...
> > 
> 
> So the driver name will be in the log but that won't help identifying where
> the log is coming from. This is more important for MHI since it reuses the
> `struct device` of the transport device like PCI-E. For instance, below is
> the log without MHI prefix:
> 
> [   47.355582] ath11k_pci 0000:01:00.0: Requested to power on
> [   47.355724] ath11k_pci 0000:01:00.0: Power on setup success
> 
> As you can see, this gives the assumption that the log is coming from the
> ath11k_pci driver. But the reality is, it is coming from MHI bus.

Then you should NOT be trying to "reuse" a struct device.

> With the prefix added, we will get below:
> 
> [   47.355582] ath11k_pci 0000:01:00.0: MHI: Requested to power on
> [   47.355724] ath11k_pci 0000:01:00.0: MHI: Power on setup success
> 
> IMO, the prefix will give users a clear idea of logs and that will be very
> useful for debugging.
> 
> Hope this clarifies.

Don't try to reuse struct devices, if you are a bus, have your own
devices as that's the correct way to do things.

thanks,

greg k-h