[PATCH 4.19 40/52] mtd: onenand_base: Adjust indentation in onenand_read_ops_nolock

From: Greg Kroah-Hartman
Date: Thu Feb 13 2020 - 10:37:11 EST


From: Nathan Chancellor <natechancellor@xxxxxxxxx>

commit 0e7ca83e82d021c928dadf4c13c137d57337540d upstream.

Clang warns:

../drivers/mtd/nand/onenand/onenand_base.c:1269:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
while (!ret) {
^
../drivers/mtd/nand/onenand/onenand_base.c:1266:2: note: previous
statement is here
if (column + thislen > writesize)
^
1 warning generated.

This warning occurs because there is a space before the tab of the while
loop. There are spaces at the beginning of a lot of the lines in this
block, remove them so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Fixes: a8de85d55700 ("[MTD] OneNAND: Implement read-while-load")
Link: https://github.com/ClangBuiltLinux/linux/issues/794
Signed-off-by: Nathan Chancellor <natechancellor@xxxxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/mtd/nand/onenand/onenand_base.c | 82 ++++++++++++++++----------------
1 file changed, 41 insertions(+), 41 deletions(-)

--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -1251,44 +1251,44 @@ static int onenand_read_ops_nolock(struc

stats = mtd->ecc_stats;

- /* Read-while-load method */
+ /* Read-while-load method */

- /* Do first load to bufferRAM */
- if (read < len) {
- if (!onenand_check_bufferram(mtd, from)) {
+ /* Do first load to bufferRAM */
+ if (read < len) {
+ if (!onenand_check_bufferram(mtd, from)) {
this->command(mtd, ONENAND_CMD_READ, from, writesize);
- ret = this->wait(mtd, FL_READING);
- onenand_update_bufferram(mtd, from, !ret);
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
if (mtd_is_eccerr(ret))
ret = 0;
- }
- }
+ }
+ }

thislen = min_t(int, writesize, len - read);
column = from & (writesize - 1);
if (column + thislen > writesize)
thislen = writesize - column;

- while (!ret) {
- /* If there is more to load then start next load */
- from += thislen;
- if (read + thislen < len) {
+ while (!ret) {
+ /* If there is more to load then start next load */
+ from += thislen;
+ if (read + thislen < len) {
this->command(mtd, ONENAND_CMD_READ, from, writesize);
- /*
- * Chip boundary handling in DDP
- * Now we issued chip 1 read and pointed chip 1
+ /*
+ * Chip boundary handling in DDP
+ * Now we issued chip 1 read and pointed chip 1
* bufferram so we have to point chip 0 bufferram.
- */
- if (ONENAND_IS_DDP(this) &&
- unlikely(from == (this->chipsize >> 1))) {
- this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
- boundary = 1;
- } else
- boundary = 0;
- ONENAND_SET_PREV_BUFFERRAM(this);
- }
- /* While load is going, read from last bufferRAM */
- this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+ */
+ if (ONENAND_IS_DDP(this) &&
+ unlikely(from == (this->chipsize >> 1))) {
+ this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
+ boundary = 1;
+ } else
+ boundary = 0;
+ ONENAND_SET_PREV_BUFFERRAM(this);
+ }
+ /* While load is going, read from last bufferRAM */
+ this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);

/* Read oob area if needed */
if (oobbuf) {
@@ -1304,24 +1304,24 @@ static int onenand_read_ops_nolock(struc
oobcolumn = 0;
}

- /* See if we are done */
- read += thislen;
- if (read == len)
- break;
- /* Set up for next read from bufferRAM */
- if (unlikely(boundary))
- this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
- ONENAND_SET_NEXT_BUFFERRAM(this);
- buf += thislen;
+ /* See if we are done */
+ read += thislen;
+ if (read == len)
+ break;
+ /* Set up for next read from bufferRAM */
+ if (unlikely(boundary))
+ this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ buf += thislen;
thislen = min_t(int, writesize, len - read);
- column = 0;
- cond_resched();
- /* Now wait for load */
- ret = this->wait(mtd, FL_READING);
- onenand_update_bufferram(mtd, from, !ret);
+ column = 0;
+ cond_resched();
+ /* Now wait for load */
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
if (mtd_is_eccerr(ret))
ret = 0;
- }
+ }

/*
* Return success, if no ECC failures, else -EBADMSG