Re: [resend PATCH v6 04/12] drm: mediatek: Omit warning on probe defers

From: Matthias Brugger
Date: Thu Feb 13 2020 - 13:58:29 EST

Next message: Atish Patra: "Re: [PATCH v8 10/11] irqchip/sifive-plic: Initialize the plic handler when cpu comes online"
Previous message: Michael Walle: "[PATCH] arm64: dts: ls1028a: add missing SPI nodes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 09/12/2019 10:39, Enric Balletbo i Serra wrote:
> Hi Matthias,
>
> On 7/12/19 23:47, matthias.bgg@xxxxxxxxxx wrote:
>> From: Matthias Brugger <mbrugger@xxxxxxxx>
>>
>> It can happen that the mmsys clock drivers aren't probed before the
>> platform driver gets invoked. The platform driver used to print a warning
>> that the driver failed to get the clocks. Omit this error on
>> the defered probe path.
>>
>> Signed-off-by: Matthias Brugger <mbrugger@xxxxxxxx>
>> ---
>> drivers/gpu/drm/mediatek/mtk_disp_color.c | 5 ++++-
>> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 5 ++++-
>> drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 5 ++++-
>> drivers/gpu/drm/mediatek/mtk_dpi.c | 12 +++++++++---
>> drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 4 +++-
>> drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++--
>> drivers/gpu/drm/mediatek/mtk_hdmi.c | 4 +++-
>> 7 files changed, 33 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_color.c b/drivers/gpu/drm/mediatek/mtk_disp_color.c
>> index 59de2a46aa49..8f0fc96ef7bc 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_disp_color.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_disp_color.c
>> @@ -118,7 +118,10 @@ static int mtk_disp_color_probe(struct platform_device *pdev)
>> ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
>> &mtk_disp_color_funcs);
>> if (ret) {
>> - dev_err(dev, "Failed to initialize component: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to initialize component: %d\n",
>> + ret);
>> +
>> return ret;
>> }
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
>> index 21851756c579..7487b0182c05 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
>> @@ -285,7 +285,10 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
>> ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
>> &mtk_disp_ovl_funcs);
>> if (ret) {
>> - dev_err(dev, "Failed to initialize component: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to initialize component: %d\n",
>> + ret);
>> +
>> return ret;
>> }
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
>> index 405afef31407..835ea8f8dab9 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
>> @@ -287,7 +287,10 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
>> ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
>> &mtk_disp_rdma_funcs);
>> if (ret) {
>> - dev_err(dev, "Failed to initialize component: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to initialize component: %d\n",
>> + ret);
>> +
>> return ret;
>> }
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
>> index be6d95c5ff25..9ed32470ad02 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
>> @@ -700,21 +700,27 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>> dpi->engine_clk = devm_clk_get(dev, "engine");
>> if (IS_ERR(dpi->engine_clk)) {
>> ret = PTR_ERR(dpi->engine_clk);
>> - dev_err(dev, "Failed to get engine clock: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get engine clock: %d\n", ret);
>
> This is only to print an error and I think that devm_clk_get will print a
> warning if the clk is not found. I guess that you can just remove the dev_err
> print logic, here and below.
>

I didn't follow all the paths, but at least devres_alloc in devm_clk_get isn't
able to alloc the memory, it will silently return -ENOMEM. So I think it is OK
to print an error message here.

Regards,
Matthias

> In case there is an optional clock you could use devm_clk_get_optional, not sure
> if there is any, though.
>
>> +
>> return ret;
>> }
>>
>> dpi->pixel_clk = devm_clk_get(dev, "pixel");
>> if (IS_ERR(dpi->pixel_clk)) {
>> ret = PTR_ERR(dpi->pixel_clk);
>> - dev_err(dev, "Failed to get pixel clock: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get pixel clock: %d\n", ret);
>> +
>
> ditto
>
>> return ret;
>> }
>>
>> dpi->tvd_clk = devm_clk_get(dev, "pll");
>> if (IS_ERR(dpi->tvd_clk)) {
>> ret = PTR_ERR(dpi->tvd_clk);
>> - dev_err(dev, "Failed to get tvdpll clock: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get tvdpll clock: %d\n", ret);
>> +
>
> ditto
>
>> return ret;
>> }
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
>> index b765181223e6..6054e2b675f9 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
>> @@ -558,7 +558,9 @@ static int mtk_ddp_probe(struct platform_device *pdev)
>>
>> ddp->clk = devm_clk_get(dev, NULL);
>> if (IS_ERR(ddp->clk)) {
>> - dev_err(dev, "Failed to get clock\n");
>> + if (PTR_ERR(ddp->clk) != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get clock\n");
>> +
>
> ditto
>
>> return PTR_ERR(ddp->clk);
>> }
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
>> index 4332563df952..66d5b0fdd678 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
>> @@ -1110,14 +1110,18 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>> dsi->engine_clk = devm_clk_get(dev, "engine");
>> if (IS_ERR(dsi->engine_clk)) {
>> ret = PTR_ERR(dsi->engine_clk);
>> - dev_err(dev, "Failed to get engine clock: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get engine clock: %d\n", ret);
>> +
>
> ditto
>
>> return ret;
>> }
>>
>> dsi->digital_clk = devm_clk_get(dev, "digital");
>> if (IS_ERR(dsi->digital_clk)) {
>> ret = PTR_ERR(dsi->digital_clk);
>> - dev_err(dev, "Failed to get digital clock: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get digital clock: %d\n", ret);
>> +
>
> ditto
>
>> return ret;
>> }
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
>> index ce91b61364eb..62f9ca2308ee 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
>> @@ -1447,7 +1447,9 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
>>
>> ret = mtk_hdmi_get_all_clk(hdmi, np);
>> if (ret) {
>> - dev_err(dev, "Failed to get clocks: %d\n", ret);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get clocks: %d\n", ret);
>> +
>> return ret;
>> }
>>
>>

Next message: Atish Patra: "Re: [PATCH v8 10/11] irqchip/sifive-plic: Initialize the plic handler when cpu comes online"
Previous message: Michael Walle: "[PATCH] arm64: dts: ls1028a: add missing SPI nodes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]