[PATCH AUTOSEL 4.14 095/186] pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs

From: Sasha Levin
Date: Fri Feb 14 2020 - 11:20:21 EST

Next message: Sasha Levin: "[PATCH AUTOSEL 4.14 097/186] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock"
Previous message: Sasha Levin: "[PATCH AUTOSEL 4.14 089/186] rtc: hym8563: Return -EINVAL if the time is known to be invalid"
In reply to: Sasha Levin: "[PATCH AUTOSEL 4.14 089/186] rtc: hym8563: Return -EINVAL if the time is known to be invalid"
Next in thread: Sasha Levin: "[PATCH AUTOSEL 4.14 097/186] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
- Some functionality is available on alternative pins, but the
PINMUX_DATA() entries is using the wrong marks,
- Several configurations are missing.

Fix this by:
- Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
corresponding enum IDs,
- Adding all missing enum IDs and marks,
- Use the right (*_PJ2x) variants for alternative pins,
- Adding all missing configurations to pinmux_data[],
- Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group Userâs Manual: Hardware, Rev. 2.00:
[1] Table 1.4 List of Pins
[2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
Channel (64 Mailboxes Ã 1 Channel) and Channel 2 as One Channel
(32 Mailboxes Ã 1 Channel),
[3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
One Channel (96 Mailboxes Ã 1 Channel),
[4] Table 48.3 Multiplexed Pins (Port B),
[5] Table 48.4 Multiplexed Pins (Port C),
[6] Table 48.10 Multiplexed Pins (Port J),
[7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/sh/include/cpu-sh2a/cpu/sh7269.h | 11 ++++++--
drivers/pinctrl/sh-pfc/pfc-sh7269.c | 39 ++++++++++++++++++---------
2 files changed, 36 insertions(+), 14 deletions(-)

diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index d516e5d488180..b887cc402b712 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -78,8 +78,15 @@ enum {
GPIO_FN_WDTOVF,

/* CAN */
- GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
- GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2,
+ GPIO_FN_CTX2, GPIO_FN_CRX2,
+ GPIO_FN_CTX1, GPIO_FN_CRX1,
+ GPIO_FN_CTX0, GPIO_FN_CRX0,
+ GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
+ GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
+ GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
+ GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
+ GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
+ GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,

/* DMAC */
GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7269.c b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
index cfdb4fc177c3e..3df0c0d139d08 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7269.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
@@ -740,13 +740,12 @@ enum {
CRX0_MARK, CTX0_MARK,
CRX1_MARK, CTX1_MARK,
CRX2_MARK, CTX2_MARK,
- CRX0_CRX1_MARK,
- CRX0_CRX1_CRX2_MARK,
- CTX0CTX1CTX2_MARK,
+ CRX0_CRX1_MARK, CTX0_CTX1_MARK,
+ CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
CRX1_PJ22_MARK, CTX1_PJ23_MARK,
CRX2_PJ20_MARK, CTX2_PJ21_MARK,
- CRX0CRX1_PJ22_MARK,
- CRX0CRX1CRX2_PJ20_MARK,
+ CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
+ CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,

/* VDC */
DV_CLK_MARK,
@@ -824,6 +823,7 @@ static const u16 pinmux_data[] = {
PINMUX_DATA(CS3_MARK, PC8MD_001),
PINMUX_DATA(TXD7_MARK, PC8MD_010),
PINMUX_DATA(CTX1_MARK, PC8MD_011),
+ PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),

PINMUX_DATA(PC7_DATA, PC7MD_000),
PINMUX_DATA(CKE_MARK, PC7MD_001),
@@ -836,11 +836,12 @@ static const u16 pinmux_data[] = {
PINMUX_DATA(CAS_MARK, PC6MD_001),
PINMUX_DATA(SCK7_MARK, PC6MD_010),
PINMUX_DATA(CTX0_MARK, PC6MD_011),
+ PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),

PINMUX_DATA(PC5_DATA, PC5MD_000),
PINMUX_DATA(RAS_MARK, PC5MD_001),
PINMUX_DATA(CRX0_MARK, PC5MD_011),
- PINMUX_DATA(CTX0CTX1CTX2_MARK, PC5MD_100),
+ PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),

PINMUX_DATA(PC4_DATA, PC4MD_00),
@@ -1292,30 +1293,32 @@ static const u16 pinmux_data[] = {
PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
- PINMUX_DATA(CTX1_MARK, PJ23MD_101),
+ PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
+ PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),

PINMUX_DATA(PJ22_DATA, PJ22MD_000),
PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
- PINMUX_DATA(CRX1_MARK, PJ22MD_101),
- PINMUX_DATA(CRX0_CRX1_MARK, PJ22MD_110),
+ PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
+ PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),

PINMUX_DATA(PJ21_DATA, PJ21MD_000),
PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
- PINMUX_DATA(CTX2_MARK, PJ21MD_101),
+ PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
+ PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),

PINMUX_DATA(PJ20_DATA, PJ20MD_000),
PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
- PINMUX_DATA(CRX2_MARK, PJ20MD_101),
- PINMUX_DATA(CRX0CRX1CRX2_PJ20_MARK, PJ20MD_110),
+ PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
+ PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),

PINMUX_DATA(PJ19_DATA, PJ19MD_000),
PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
@@ -1666,12 +1669,24 @@ static const struct pinmux_func pinmux_func_gpios[] = {
GPIO_FN(WDTOVF),

/* CAN */
+ GPIO_FN(CTX2),
+ GPIO_FN(CRX2),
GPIO_FN(CTX1),
GPIO_FN(CRX1),
GPIO_FN(CTX0),
GPIO_FN(CRX0),
+ GPIO_FN(CTX0_CTX1),
GPIO_FN(CRX0_CRX1),
+ GPIO_FN(CTX0_CTX1_CTX2),
GPIO_FN(CRX0_CRX1_CRX2),
+ GPIO_FN(CTX2_PJ21),
+ GPIO_FN(CRX2_PJ20),
+ GPIO_FN(CTX1_PJ23),
+ GPIO_FN(CRX1_PJ22),
+ GPIO_FN(CTX0_CTX1_PJ23),
+ GPIO_FN(CRX0_CRX1_PJ22),
+ GPIO_FN(CTX0_CTX1_CTX2_PJ21),
+ GPIO_FN(CRX0_CRX1_CRX2_PJ20),

/* DMAC */
GPIO_FN(TEND0),
--
2.20.1

Next message: Sasha Levin: "[PATCH AUTOSEL 4.14 097/186] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock"
Previous message: Sasha Levin: "[PATCH AUTOSEL 4.14 089/186] rtc: hym8563: Return -EINVAL if the time is known to be invalid"
In reply to: Sasha Levin: "[PATCH AUTOSEL 4.14 089/186] rtc: hym8563: Return -EINVAL if the time is known to be invalid"
Next in thread: Sasha Levin: "[PATCH AUTOSEL 4.14 097/186] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]