[PATCH AUTOSEL 5.5 071/542] spi: fsl-lpspi: fix only one cs-gpio working

From: Sasha Levin
Date: Fri Feb 14 2020 - 13:19:31 EST


From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

[ Upstream commit bc3a8b295e5bca9d1ec2622a6ba38289f9fd3d8a ]

Why it does not work at the moment:
- num_chipselect sets the number of cs-gpios that are in the DT.
This comes from drivers/spi/spi.c
- num_chipselect gets set with devm_spi_register_controller, that is
called in drivers/spi/spi.c
- devm_spi_register_controller got called after num_chipselect has
been used.

How this commit fixes the issue:
- devm_spi_register_controller gets called before num_chipselect is
being used.

Fixes: c7a402599504 ("spi: lpspi: use the core way to implement cs-gpio function")
Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20191204141312.1411251-1-philippe.schenker@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/spi/spi-fsl-lpspi.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 2cc0ddb4a9889..1375bdfc587bf 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -862,6 +862,22 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
fsl_lpspi->dev = &pdev->dev;
fsl_lpspi->is_slave = is_slave;

+ controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
+ controller->transfer_one = fsl_lpspi_transfer_one;
+ controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware;
+ controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware;
+ controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+ controller->dev.of_node = pdev->dev.of_node;
+ controller->bus_num = pdev->id;
+ controller->slave_abort = fsl_lpspi_slave_abort;
+
+ ret = devm_spi_register_controller(&pdev->dev, controller);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "spi_register_controller error.\n");
+ goto out_controller_put;
+ }
+
if (!fsl_lpspi->is_slave) {
for (i = 0; i < controller->num_chipselect; i++) {
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
@@ -885,16 +901,6 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
controller->prepare_message = fsl_lpspi_prepare_message;
}

- controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
- controller->transfer_one = fsl_lpspi_transfer_one;
- controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware;
- controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware;
- controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
- controller->dev.of_node = pdev->dev.of_node;
- controller->bus_num = pdev->id;
- controller->slave_abort = fsl_lpspi_slave_abort;
-
init_completion(&fsl_lpspi->xfer_done);

res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -952,12 +958,6 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
if (ret < 0)
dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret);

- ret = devm_spi_register_controller(&pdev->dev, controller);
- if (ret < 0) {
- dev_err(&pdev->dev, "spi_register_controller error.\n");
- goto out_controller_put;
- }
-
return 0;

out_controller_put:
--
2.20.1