Re: [PATCH] iio: trigger: stm32-timer: disable master mode when stopping

From: Jonathan Cameron
Date: Sat Feb 15 2020 - 13:41:42 EST


On Fri, 14 Feb 2020 17:46:35 +0100
Fabrice Gasnier <fabrice.gasnier@xxxxxx> wrote:

> Master mode should be disabled when stopping. This mainly impacts
> possible other use-case after timer has been stopped. Currently,
> master mode remains set (from start routine).
>
> Fixes: 6fb34812c2a2 ("iio: stm32 trigger: Add support for TRGO2 triggers")
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
I 'think' this is tangential to the other changes to this driver recently
and you seem to have prepared this against current mailine.

Hence applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan

> ---
> drivers/iio/trigger/stm32-timer-trigger.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
> index 2e0d32a..2f82e8c 100644
> --- a/drivers/iio/trigger/stm32-timer-trigger.c
> +++ b/drivers/iio/trigger/stm32-timer-trigger.c
> @@ -161,7 +161,8 @@ static int stm32_timer_start(struct stm32_timer_trigger *priv,
> return 0;
> }
>
> -static void stm32_timer_stop(struct stm32_timer_trigger *priv)
> +static void stm32_timer_stop(struct stm32_timer_trigger *priv,
> + struct iio_trigger *trig)
> {
> u32 ccer, cr1;
>
> @@ -179,6 +180,12 @@ static void stm32_timer_stop(struct stm32_timer_trigger *priv)
> regmap_write(priv->regmap, TIM_PSC, 0);
> regmap_write(priv->regmap, TIM_ARR, 0);
>
> + /* Force disable master mode */
> + if (stm32_timer_is_trgo2_name(trig->name))
> + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, 0);
> + else
> + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0);
> +
> /* Make sure that registers are updated */
> regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
> }
> @@ -197,7 +204,7 @@ static ssize_t stm32_tt_store_frequency(struct device *dev,
> return ret;
>
> if (freq == 0) {
> - stm32_timer_stop(priv);
> + stm32_timer_stop(priv, trig);
> } else {
> ret = stm32_timer_start(priv, trig, freq);
> if (ret)