Re: [PATCH] mm/slub: Detach node lock from counting free objects

[Roman Gushchin]

On Sat, Feb 22, 2020 at 02:55:39PM +0800, Wen Yang wrote:
> 
> 
> On 2020/2/20 11:40 äå, Roman Gushchin wrote:
> > On Thu, Feb 20, 2020 at 09:53:26PM +0800, Wen Yang wrote:
> > > 
> > > 
> > > On 2020/2/19 4:53 äå, Roman Gushchin wrote:
> > > > On Sun, Feb 16, 2020 at 12:15:54PM +0800, Wen Yang wrote:
> > > > > 
> > > > > 
> > > > > On 2020/2/13 6:52 äå, Andrew Morton wrote:
> > > > > > On Sat,  1 Feb 2020 11:15:02 +0800 Wen Yang <wenyang@xxxxxxxxxxxxxxxxx> wrote:
> > > > > > 
> > > > > > > The lock, protecting the node partial list, is taken when couting the free
> > > > > > > objects resident in that list. It introduces locking contention when the
> > > > > > > page(s) is moved between CPU and node partial lists in allocation path
> > > > > > > on another CPU. So reading "/proc/slabinfo" can possibily block the slab
> > > > > > > allocation on another CPU for a while, 200ms in extreme cases. If the
> > > > > > > slab object is to carry network packet, targeting the far-end disk array,
> > > > > > > it causes block IO jitter issue.
> > > > > > > 
> > > > > > > This fixes the block IO jitter issue by caching the total inuse objects in
> > > > > > > the node in advance. The value is retrieved without taking the node partial
> > > > > > > list lock on reading "/proc/slabinfo".
> > > > > > > 
> > > > > > > ...
> > > > > > > 
> > > > > > > @@ -1768,7 +1774,9 @@ static void free_slab(struct kmem_cache *s, struct page *page)
> > > > > > >     static void discard_slab(struct kmem_cache *s, struct page *page)
> > > > > > >     {
> > > > > > > -	dec_slabs_node(s, page_to_nid(page), page->objects);
> > > > > > > +	int inuse = page->objects;
> > > > > > > +
> > > > > > > +	dec_slabs_node(s, page_to_nid(page), page->objects, inuse);
> > > > > > 
> > > > > > Is this right?  dec_slabs_node(..., page->objects, page->objects)?
> > > > > > 
> > > > > > If no, we could simply pass the page* to inc_slabs_node/dec_slabs_node
> > > > > > and save a function argument.
> > > > > > 
> > > > > > If yes then why?
> > > > > > 
> > > > > 
> > > > > Thanks for your comments.
> > > > > We are happy to improve this patch based on your suggestions.
> > > > > 
> > > > > 
> > > > > When the user reads /proc/slabinfo, in order to obtain the active_objs
> > > > > information, the kernel traverses all slabs and executes the following code
> > > > > snippet:
> > > > > static unsigned long count_partial(struct kmem_cache_node *n,
> > > > >                                           int (*get_count)(struct page *))
> > > > > {
> > > > >           unsigned long flags;
> > > > >           unsigned long x = 0;
> > > > >           struct page *page;
> > > > > 
> > > > >           spin_lock_irqsave(&n->list_lock, flags);
> > > > >           list_for_each_entry(page, &n->partial, slab_list)
> > > > >                   x += get_count(page);
> > > > >           spin_unlock_irqrestore(&n->list_lock, flags);
> > > > >           return x;
> > > > > }
> > > > > 
> > > > > It may cause performance issues.
> > > > > 
> > > > > Christoph suggested "you could cache the value in the userspace application?
> > > > > Why is this value read continually?", But reading the /proc/slabinfo is
> > > > > initiated by the user program. As a cloud provider, we cannot control user
> > > > > behavior. If a user program inadvertently executes cat /proc/slabinfo, it
> > > > > may affect other user programs.
> > > > > 
> > > > > As Christoph said: "The count is not needed for any operations. Just for the
> > > > > slabinfo output. The value has no operational value for the allocator
> > > > > itself. So why use extra logic to track it in potentially performance
> > > > > critical paths?"
> > > > > 
> > > > > In this way, could we show the approximate value of active_objs in the
> > > > > /proc/slabinfo?
> > > > > 
> > > > > Based on the following information:
> > > > > In the discard_slab() function, page->inuse is equal to page->total_objects;
> > > > > In the allocate_slab() function, page->inuse is also equal to
> > > > > page->total_objects (with one exception: for kmem_cache_node, page-> inuse
> > > > > equals 1);
> > > > > page->inuse will only change continuously when the obj is constantly
> > > > > allocated or released. (This should be the performance critical path
> > > > > emphasized by Christoph)
> > > > > 
> > > > > When users query the global slabinfo information, we may use total_objects
> > > > > to approximate active_objs.
> > > > 
> > > > Well, from one point of view, it makes no sense, because the ratio between
> > > > these two numbers is very meaningful: it's the slab utilization rate.
> > > > 
> > > > On the other side, with enabled per-cpu partial lists active_objs has
> > > > nothing to do with the reality anyway, so I agree with you, calling
> > > > count_partial() is almost useless.
> > > > 
> > > > That said, I wonder if the right thing to do is something like the patch below?
> > > > 
> > > > Thanks!
> > > > 
> > > > Roman
> > > > 
> > > > --
> > > > 
> > > > diff --git a/mm/slub.c b/mm/slub.c
> > > > index 1d644143f93e..ba0505e75ecc 100644
> > > > --- a/mm/slub.c
> > > > +++ b/mm/slub.c
> > > > @@ -2411,14 +2411,16 @@ static inline unsigned long node_nr_objs(struct kmem_cache_node *n)
> > > >    static unsigned long count_partial(struct kmem_cache_node *n,
> > > >                                           int (*get_count)(struct page *))
> > > >    {
> > > > -       unsigned long flags;
> > > >           unsigned long x = 0;
> > > > +#ifdef CONFIG_SLUB_CPU_PARTIAL
> > > > +       unsigned long flags;
> > > >           struct page *page;
> > > >           spin_lock_irqsave(&n->list_lock, flags);
> > > >           list_for_each_entry(page, &n->partial, slab_list)
> > > >                   x += get_count(page);
> > > >           spin_unlock_irqrestore(&n->list_lock, flags);
> > > > +#endif
> > > >           return x;
> > > >    }
> > > >    #endif /* CONFIG_SLUB_DEBUG || CONFIG_SYSFS */
> > > > 
> > > 
> > > Hi Roman,
> > > 
> > > Thanks for your comments.
> > > 
> > > In the server scenario, SLUB_CPU_PARTIAL is turned on by default, and can
> > > improve the performance of the cloud server, as follows:
> > 
> > Hello, Wen!
> > 
> > That's exactly my point: if CONFIG_SLUB_CPU_PARTIAL is on, count_partial() is useless
> > anyway because the returned number is far from the reality. So if we define
> > active_objects == total_objects, as you basically suggest, we do not introduce any
> > regression. Actually I think it's even preferable to show the unrealistic uniform 100%
> > slab utilization rather than some very high but incorrect value.
> > 
> > And on real-time systems uncontrolled readings of /proc/slabinfo is less
> > of a concern, I hope.
> > 
> > Thank you!
> > 
> 
> Greatï
> We only need to correct a typo to achieve this goal, as follows:
> Change #ifdef CONFIG_SLUB_CPU_PARTIAL to #ifndef CONFIG_SLUB_CPU_PARTIAL

Yes, you're obviously right.

Thanks!