Re: [RFT PATCH 4/4] usb: dwc2: Make "trimming xfer length" a debug message

[Doug Anderson]

Hi,

On Wed, Feb 26, 2020 at 1:04 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> With some USB network adapters, such as DM96xx, the following message
> is seen for each maximum size receive packet.
>
> dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length
>
> This happens because the packet size requested by the driver is 1522
> bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to
> receive 24*64 = 1536 bytes, and the chip does indeed send more than
> 1522 bytes of data. Since the event does not indicate an error condition,
> the message is just noise. Demote it to debug level.
>
> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
>  drivers/usb/dwc2/hcd_intr.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Suggest a "Fixes" or "Cc: stable" tag.  This one isn't as important as
the others, but presumably you'll start hitting it a lot more now
(whereas previously we'd just crash).

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>