Re: [PATCH] media: i2c: imx219: add support for enum frame interval

From: Eugen.Hristev
Date: Fri Feb 28 2020 - 09:05:50 EST


On 28.02.2020 15:44, Dave Stevenson wrote:
> Hi Eugen.
>
> On Thu, 27 Feb 2020 at 15:19, Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> wrote:
>>
>> Add support for enum frame intervals IOCTL.
>> The current supported framerates are only available as comments inside
>> the code.
>> Add support for VIDIOC_ENUM_FRAMEINTERVALS as the enum_frame_interval
>> callback as pad ops.
>>
>> # v4l2-ctl --list-frameintervals width=1920,height=1080,pixelformat=RG10
>> ioctl: VIDIOC_ENUM_FRAMEINTERVALS
>> Interval: Discrete 0.067s (15.000 fps)
>> Interval: Discrete 0.033s (30.000 fps)
>> Interval: Discrete 0.033s (30.000 fps)
>
> But the frame rates are not discrete. You have frame rate control via
> V4L2_CID_VBLANK, which can be used in conjunction with V4L2_CID_HBLANK
> and V4L2_CID_PIXEL_RATE to determine actual frame period.
>
> See https://linuxtv.org/downloads/v4l-dvb-apis-new/uapi/v4l/ext-ctrls-image-source.html?highlight=v4l2_cid_vblank
> I believe this is the preferred route to doing frame rate control on
> image sensors. I assume someone will correct me if I'm wrong on that.


Okay... , I was guided towards this by the comments in the code, saying
that the three supported modes are at a constant frame per second...

Those comments are wrong then ?

Thanks for replying,

Eugen

>
> Dave
>
>> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>> ---
>>
>> Hello,
>>
>> This is on top of Sakari's tree in linuxtv.org
>>
>> Thanks
>> Eugen
>>
>> drivers/media/i2c/imx219.c | 27 +++++++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>>
>> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
>> index f1effb5a5f66..17fcedd4edb6 100644
>> --- a/drivers/media/i2c/imx219.c
>> +++ b/drivers/media/i2c/imx219.c
>> @@ -127,6 +127,8 @@ struct imx219_mode {
>> unsigned int width;
>> /* Frame height */
>> unsigned int height;
>> + /* Frame rate */
>> + u8 fps;
>>
>> /* V-timing */
>> unsigned int vts_def;
>> @@ -381,6 +383,7 @@ static const struct imx219_mode supported_modes[] = {
>> /* 8MPix 15fps mode */
>> .width = 3280,
>> .height = 2464,
>> + .fps = 15,
>> .vts_def = IMX219_VTS_15FPS,
>> .reg_list = {
>> .num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
>> @@ -391,6 +394,7 @@ static const struct imx219_mode supported_modes[] = {
>> /* 1080P 30fps cropped */
>> .width = 1920,
>> .height = 1080,
>> + .fps = 30,
>> .vts_def = IMX219_VTS_30FPS_1080P,
>> .reg_list = {
>> .num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
>> @@ -401,6 +405,7 @@ static const struct imx219_mode supported_modes[] = {
>> /* 2x2 binned 30fps mode */
>> .width = 1640,
>> .height = 1232,
>> + .fps = 30,
>> .vts_def = IMX219_VTS_30FPS_BINNED,
>> .reg_list = {
>> .num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
>> @@ -680,6 +685,27 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd,
>> return 0;
>> }
>>
>> +static int imx219_enum_frame_interval(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_pad_config *cfg,
>> + struct v4l2_subdev_frame_interval_enum *fie)
>> +{
>> + struct imx219 *imx219 = to_imx219(sd);
>> +
>> + if (fie->index >= ARRAY_SIZE(supported_modes))
>> + return -EINVAL;
>> +
>> + if (fie->code != imx219_get_format_code(imx219))
>> + return -EINVAL;
>> +
>> + if (fie->pad)
>> + return -EINVAL;
>> +
>> + fie->interval.numerator = 1;
>> + fie->interval.denominator = supported_modes[fie->index].fps;
>> +
>> + return 0;
>> +}
>> +
>> static void imx219_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
>> {
>> fmt->colorspace = V4L2_COLORSPACE_SRGB;
>> @@ -1004,6 +1030,7 @@ static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
>> .get_fmt = imx219_get_pad_format,
>> .set_fmt = imx219_set_pad_format,
>> .enum_frame_size = imx219_enum_frame_size,
>> + .enum_frame_interval = imx219_enum_frame_interval,
>> };
>>
>> static const struct v4l2_subdev_ops imx219_subdev_ops = {
>> --
>> 2.20.1
>>