Re: [PATCH v3 5/6] MIPS: DTS: CI20: multiple DTS improvements

From: Paul Cercueil
Date: Fri Feb 28 2020 - 09:50:37 EST




Le ven., févr. 28, 2020 at 15:42, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :

Am 28.02.2020 um 15:36 schrieb Paul Cercueil <paul@xxxxxxxxxxxxxxx>:

Hi Nikolaus,

Le dim., févr. 16, 2020 at 21:20, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :
a) add DT node for SW1 as Enter button
The SW1 button can be used as a simple one-button keyboard
and is connected to PD17.
Note: SW1 has a second meaning to change the boot sequence
when pressed while powering on.
b) give eth0_power a defined voltage.
This is a 3.3V power switch (DVNET3.3V ).
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
arch/mips/boot/dts/ingenic/ci20.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 1ab55be707af..4bacefa2cfce 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -4,6 +4,7 @@
#include "jz4780.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
compatible = "img,ci20", "ingenic,jz4780";
@@ -25,6 +26,17 @@
0x30000000 0x30000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ sw1 {
+ label = "ci20:sw1";
+ linux,code = <KEY_ENTER>;

Why KEY_ENTER? It would make it impossible for applications to know that it's actually the switch that has been pressed an not the keyboard.

Ah, ok. I didn't think about the use case that a physical keyboard is connected to one of the USB ports.

What else would you propose? I think your argument is for every existing KEY_CODE. Should we add a new one?

There are plenty you can use. I'd suggest KEY_F13 as it's general-purpose.

-Paul