[PATCH v5 9/9] arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP device

[Sandeep Maheswaram]

Overriding the QUSB2 V2 Phy tuning parameters for SC7180 IDP device.

Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 043c9b9..4dd8ebc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -310,9 +310,11 @@
 	vdda-pll-supply = <&vreg_l11a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
 	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
 	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
 };
 
 &usb_1_qmpphy {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation