[PATCH v2 17/17] clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks

[Lubomir Rintel]

They were reversed because I read the datasheet upside down.
Actually there is no datasheet, but I ended up understanding the
comments in Open Firmware driver wrong.

Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>

---
Changes since v1:
- Added this patch

 drivers/clk/mmp/clk-of-mmp2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 8769860fab640..52dc8b43acd9a 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -314,8 +314,8 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_SDH2, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_SDH3, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
-	{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x09, 0x09, 0x0, 0, &disp0_lock},
-	{MMP2_CLK_DISP0_LCDC, "disp0_lcdc_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x12, 0x12, 0x0, 0, &disp0_lock},
+	{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x12, 0x12, 0x0, 0, &disp0_lock},
+	{MMP2_CLK_DISP0_LCDC, "disp0_lcdc_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x09, 0x09, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x09, 0x09, 0x0, 0, &disp1_lock},
 	{MMP2_CLK_CCIC_ARBITER, "ccic_arbiter", "vctcxo", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1800, 0x1800, 0x0, 0, &ccic0_lock},
-- 
2.25.1