Re: [PATCH] spi: spi-fsl-dspi: fix DMA mapping

[Vladimir Oltean]

On Tue, 10 Mar 2020 at 10:12, Michael Walle <michael@xxxxxxxx> wrote:
>
> Am 2020-03-10 08:40, schrieb Michael Walle:
> > Am 2020-03-10 08:33, schrieb Michael Walle:
> >> Use the correct device to request the DMA mapping. Otherwise the IOMMU
> >> doesn't get the mapping and it will generate a page fault.
> >>
> >> The error messages look like:
> >> [    3.008452] arm-smmu 5000000.iommu: Unhandled context fault:
> >> fsr=0x402, iova=0xf9800000, fsynr=0x3f0022, cbfrsynra=0x828, cb=8
> >> [    3.020123] arm-smmu 5000000.iommu: Unhandled context fault:
> >> fsr=0x402, iova=0xf9800000, fsynr=0x3f0022, cbfrsynra=0x828, cb=8
> >>
> >> This was tested on a custom board with a LS1028A SoC.
> >
> > Oh fu.. please disregard this patch. DMA mapping still isn't working.
> > Somehow I missed that the transfer mode was turned back to its default
> > XSPI mode.
>
> Damn. I need more coffee.. this patch IS working. Only the first probe
> fails due to EPROBE_DEFER.
>
> [    2.539706] fsl-dspi 2120000.spi: rx dma channel not available (-517)
> [    2.546200] fsl-dspi 2120000.spi: can't get dma channels
> [    3.622774] spi-nor spi1.0: w25q128fw (16384 Kbytes)
>
> -michael

I'm testing LS1028A with IOMMU_DEFAULT_PASSTHROUGH=y and I didn't have
time to change my setup now. I've also sent a v3 to my patch series
which is going to conflict with this one, sorry. I would have picked
your patch up with my series but I didn't have the right environment
to test it.

Thanks,
-Vladimir