[PATCH 4.19 40/86] usb: core: port: do error out if usb_autopm_get_interface() fails

[Greg Kroah-Hartman]

From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>

commit 1f8b39bc99a31759e97a0428a5c3f64802c1e61d upstream.

Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:

On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
 > A revised search finds line 997 in drivers/usb/core/hub.c and lines
 > 216, 269 in drivers/usb/core/port.c.  (I didn't try looking in any
 > other directories.)  AFAICT all three of these should check the
 > return value, although a error message in the kernel log probably
 > isn't needed.

Factor out the usb_port_runtime_{resume,suspend}() changes into a
standalone patch to allow conflict-free porting on top of stable v3.9+.

[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@xxxxxxxxxxxxxxxxxxxx

Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device")
Cc: stable@xxxxxxxxxxxxxxx # v3.9+
Suggested-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200226175036.14946-3-erosca@xxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/core/port.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -203,7 +203,10 @@ static int usb_port_runtime_resume(struc
 	if (!port_dev->is_superspeed && peer)
 		pm_runtime_get_sync(&peer->dev);
 
-	usb_autopm_get_interface(intf);
+	retval = usb_autopm_get_interface(intf);
+	if (retval < 0)
+		return retval;
+
 	retval = usb_hub_set_port_power(hdev, hub, port1, true);
 	msleep(hub_power_on_good_delay(hub));
 	if (udev && !retval) {
@@ -256,7 +259,10 @@ static int usb_port_runtime_suspend(stru
 	if (usb_port_block_power_off)
 		return -EBUSY;
 
-	usb_autopm_get_interface(intf);
+	retval = usb_autopm_get_interface(intf);
+	if (retval < 0)
+		return retval;
+
 	retval = usb_hub_set_port_power(hdev, hub, port1, false);
 	usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
 	if (!port_dev->is_superspeed)