[PATCH 2/3] ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@xxxxxxxx>

When the SPI device nodes were added, SPI2 and SPI3 had incorrect
register base addresses.

Fix the base address for both of them.

Fixes: 554581b79139 ("ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes")
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
 arch/arm/boot/dts/sun8i-r40.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index b278686d0c22..81cc92ddc78b 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -718,10 +718,10 @@ spi1: spi@1c06000 {
 			#size-cells = <0>;
 		};
 
-		spi2: spi@1c07000 {
+		spi2: spi@1c17000 {
 			compatible = "allwinner,sun8i-r40-spi",
 				     "allwinner,sun8i-h3-spi";
-			reg = <0x01c07000 0x1000>;
+			reg = <0x01c17000 0x1000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
 			clock-names = "ahb", "mod";
@@ -731,10 +731,10 @@ spi2: spi@1c07000 {
 			#size-cells = <0>;
 		};
 
-		spi3: spi@1c0f000 {
+		spi3: spi@1c1f000 {
 			compatible = "allwinner,sun8i-r40-spi",
 				     "allwinner,sun8i-h3-spi";
-			reg = <0x01c0f000 0x1000>;
+			reg = <0x01c1f000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
 			clock-names = "ahb", "mod";
-- 
2.25.1