Re: [v2] dt-bindings: msm: disp: add yaml schemas for DPU and DSI bindings

From: Sam Ravnborg
Date: Tue Mar 10 2020 - 14:05:38 EST

Hi Krishna

On Mon, Mar 09, 2020 at 03:52:46PM +0530, Krishna Manikandan wrote:
> MSM Mobile Display Subsytem(MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema
> for the device tree bindings for the same.
>
> Signed-off-by: Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
Looks good ow - thanks.
Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>

But you should wait for a review by someone more fluent in this area
too.

Sam
>
> Changes in v2:
> - Changed dpu to DPU (Sam Ravnborg)
> - Fixed indentation issues (Sam Ravnborg)
> - Added empty line between different properties (Sam Ravnborg)
> - Replaced reference txt files with their corresponding
> yaml files (Sam Ravnborg)
> - Modified the file to use "|" only when it is
> necessary (Sam Ravnborg)
> ---
> .../bindings/display/msm/dpu-sc7180.yaml | 261 +++++++++++++++
> .../bindings/display/msm/dpu-sdm845.yaml | 259 +++++++++++++++
> .../bindings/display/msm/dsi-sc7180.yaml | 362 +++++++++++++++++++++
> .../bindings/display/msm/dsi-sdm845.yaml | 362 +++++++++++++++++++++
> 4 files changed, 1244 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
> create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
> create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml
> create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
> new file mode 100644
> index 0000000..2a9efc5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
> @@ -0,0 +1,261 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Description of Qualcomm Display DPU dt properties.
> +
> +maintainers:
> + - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
> +
> +description: |
> + Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates
> + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
> + bindings of MDSS and DPU are mentioned for SC7180 target.
> +
> +properties:
> + "mdss":
> + type: object
> + description: |
> + Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP
> + interfaces.
> +
> + properties:
> + compatible:
> + items:
> + - const: qcom,sc7180-mdss
> +
> + reg:
> + description: Physical base address and length of controller's registers.
> +
> + reg-names:
> + description: |
> + Names for different register regions defined above. The required region
> + is mentioned below.
> + items:
> + - const: mdss
> +
> + power-domains:
> + description: |
> + A power domain consumer specifier according to
> + Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + clocks:
> + description: List of clock specifiers for clocks needed by the device.
> +
> + clock-names:
> + description: |
> + Device clock names in the same order as mentioned in clocks property.
> + The required clocks are mentioned below.
> + items:
> + - const: iface
> + - const: bus
> + - const: ahb
> + - const: core
> +
> + interrupts:
> + description: Interrupt signal from MDSS.
> +
> + interrupt-controller:
> + description: Identifies the node as an interrupt controller.
> +
> + "#interrupt-cells":
> + description: |
> + Specifies the number of cells needed to encode an interrupt source.
> + const: 1
> +
> + iommus:
> + description: Phandle of iommu device node.
> +
> + "#address-cells":
> + description: |
> + Indicate how many cells (32 bits values) are needed to form the base
> + address part in the reg property.
> +
> + "#size-cells":
> + description: |
> + Indicate how many cells (32 bits values) are needed to specify the
> + size part in the reg property.
> +
> + ranges:
> + description: |
> + Parent bus address space is the same as the child bus address space.
> +
> + interconnects :
> + description: |
> + Interconnect path specifier for MDSS according to
> + Documentation/devicetree/bindings/interconnect/interconnect.txt.
> + Should be 2 paths corresponding to 2 AXI ports.
> +
> + interconnect-names:
> + description: |
> + MDSS will have 2 port names to differentiate between the
> + 2 interconnect paths defined with interconnect specifier.
> +
> + properties:
> + description: |
> + The optional properties for MDSS are mentioned below.
> + assigned-clocks:
> + description: |
> + List of clock specifiers for clocks needing rate assignment.
> +
> + assigned-clock-rates:
> + description: |
> + List of clock frequencies sorted in the same order as the
> + assigned-clocks property.
> +
> + "mdp":
> + type: object
> + description: Node containing the properties of DPU.
> +
> + properties:
> + compatible:
> + items:
> + - const: qcom,sc7180-dpu
> +
> + reg:
> + description: |
> + Physical base address and length of controller's registers.
> +
> + reg-names:
> + description: |
> + Register region names. The following regions are required.
> + items:
> + - const: mdp
> + - const: vbif
> +
> + clocks:
> + description: |
> + List of clock specifiers for clocks needed by the device.
> +
> + clock-names:
> + description: |
> + Device clock names, must be in same order as clocks property.
> + The following clocks are required. "bus" is an optional property
> + in sc7180 due to architecture change.
> + items:
> + - const: iface
> + - const: core
> + - const: vsync
> +
> + interrupts:
> + description: Interrupt line from DPU to MDSS.
> +
> + ports:
> + type: object
> + description: |
> + Contains the list of output ports from DPU device. These ports
> + connect to interfaces that are external to the DPU hardware,
> + such as DSI, DP etc. Each output port contains an endpoint that
> + describes how it is connected to an external interface. These
> + are described by the standard properties documented in files
> + mentioned below.
> +
> + Documentation/devicetree/bindings/graph.txt
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> + properties:
> + port0:
> + type: object
> + description: DPU_INTF1 (DSI1)
> + port1:
> + type: object
> + description: DPU_INTF2 (DSI2)
> +
> + properties:
> + description: |
> + The optional properties for DPU are mentioned below.
> + assigned-clocks:
> + description: |
> + List of clock specifiers for clocks needing rate assignment.
> +
> + assigned-clock-rates:
> + description: |
> + List of clock frequencies sorted in the same order as the
> + assigned-clocks property.
> +
> + clock-names:
> + description: |
> + Optional device clocks, needed for accessing LUT blocks.
> + items:
> + - const: rot
> + - const: lut
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - power-domains
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-controller
> + - iommus
> + - ports
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
> + #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interconnect/qcom,sdm845.h>
> + mdss: mdss@ae00000 {
> + compatible = "qcom,sc7180-mdss";
> + reg = <0xae00000 0x1000>;
> + reg-names = "mdss";
> + power-domains = <&clock_dispcc 0>;
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface", "gcc_bus", "core";
> + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
> + assigned-clock-rates = <300000000>;
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
> +
> + interconnect-names = "mdp0-mem";
> +
> + iommus = <&apps_smmu 0x800 0x2>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + mdss_mdp: mdp@ae01000 {
> + compatible = "qcom,sc7180-dpu";
> + reg = <0 0x0ae01000 0 0x8f000>,
> + <0 0x0aeb0000 0 0x2008>,
> + <0 0x0af03000 0 0x16>;
> + reg-names = "mdp", "vbif", "disp_cc";
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_ROT_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "iface", "rot", "lut", "core",
> + "vsync";
> + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <300000000>, <19200000>;
> + interrupt-parent = <&mdss>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dpu_intf1_out: endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> + };
> + };
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
> new file mode 100644
> index 0000000..bb975938
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
> @@ -0,0 +1,259 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Description of Qualcomm Display DPU dt properties.
> +
> +maintainers:
> + - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
> +
> +description: |
> + Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates
> + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
> + bindings of MDSS and DPU are mentioned for SDM845 target.
> +
> +properties:
> + "mdss":
> + type: object
> + description: |
> + Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP
> + interfaces.
> +
> + properties:
> + compatible:
> + items:
> + - const: qcom,sdm845-mdss
> +
> + reg:
> + description: Physical base address and length of controller's registers.
> +
> + reg-names:
> + description: |
> + Names for different register regions defined above. The required region
> + is mentioned below.
> + items:
> + - const: mdss
> +
> + power-domains:
> + description: |
> + A power domain consumer specifier according to
> + Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + clocks:
> + description: List of clock specifiers for clocks needed by the device.
> +
> + clock-names:
> + description: |
> + Device clock names in the same order as mentioned in clocks property.
> + The required clocks are mentioned below.
> + items:
> + - const: iface
> + - const: bus
> + - const: core
> +
> + interrupts:
> + description: Interrupt signal from MDSS.
> +
> + interrupt-controller:
> + description: Identifies the node as an interrupt controller.
> +
> + "#interrupt-cells":
> + description: |
> + Specifies the number of cells needed to encode an interrupt source.
> + const: 1
> +
> + iommus:
> + description: Phandle of iommu device node.
> +
> + "#address-cells":
> + description: |
> + Indicate how many cells (32 bits values) are needed to form the base
> + address part in the reg property.
> +
> + "#size-cells":
> + description: |
> + Indicate how many cells (32 bits values) are needed to specify the
> + size part in the reg property.
> +
> + ranges:
> + description: |
> + Parent bus address space is the same as the child bus address space.
> +
> + interconnects :
> + description: |
> + Interconnect path specifier for MDSS according to
> + Documentation/devicetree/bindings/interconnect/interconnect.txt.
> + Should be 2 paths corresponding to 2 AXI ports.
> +
> + interconnect-names:
> + description: |
> + MDSS will have 2 port names to differentiate between the
> + 2 interconnect paths defined with interconnect specifier.
> +
> + properties:
> + description: |
> + The optional properties for MDSS are mentioned below.
> + assigned-clocks:
> + description: |
> + List of clock specifiers for clocks needing rate assignment.
> +
> + assigned-clock-rates:
> + description: |
> + List of clock frequencies sorted in the same order as the
> + assigned-clocks property.
> +
> + "mdp":
> + type: object
> + description: Node containing the properties of DPU.
> +
> + properties:
> + compatible:
> + items:
> + - const: qcom,sc7180-dpu
> +
> + reg:
> + description: |
> + Physical base address and length of controller's registers.
> +
> + reg-names:
> + description: |
> + Register region names. The following regions are required.
> + items:
> + - const: mdp
> + - const: vbif
> +
> + clocks:
> + description: |
> + List of clock specifiers for clocks needed by the device.
> +
> + clock-names:
> + description: |
> + Device clock names, must be in same order as clocks property.
> + The following clocks are required.
> + items:
> + - const: bus
> + - const: iface
> + - const: core
> + - const: vsync
> +
> + interrupts:
> + description: Interrupt line from DPU to MDSS.
> +
> + ports:
> + type: object
> + description: |
> + Contains the list of output ports from DPU device. These ports
> + connect to interfaces that are external to the DPU hardware,
> + such as DSI, DP etc. Each output port contains an endpoint that
> + describes how it is connected to an external interface. These
> + are described by the standard properties documented in files
> + mentioned below.
> +
> + Documentation/devicetree/bindings/graph.txt
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> + properties:
> + port0:
> + type: object
> + description: DPU_INTF1 (DSI1)
> + port1:
> + type: object
> + description: DPU_INTF2 (DSI2)
> +
> + properties:
> + description: |
> + The optional properties for DPU are mentioned below.
> + assigned-clocks:
> + description: |
> + List of clock specifiers for clocks needing rate assignment.
> +
> + assigned-clock-rates:
> + description: |
> + List of clock frequencies sorted in the same order as the
> + assigned-clocks property.
> +
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - power-domains
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-controller
> + - iommus
> + - ports
> +
> +examples:
> +- |
> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + mdss: mdss@ae00000 {
> + compatible = "qcom,sdm845-mdss";
> + reg = <0 0x0ae00000 0 0x1000>;
> + reg-names = "mdss";
> + power-domains = <&dispcc MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&gcc GCC_DISP_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface", "bus", "core";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
> + assigned-clock-rates = <300000000>;
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + iommus = <&apps_smmu 0x880 0x8>,
> + <&apps_smmu 0xc80 0x8>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + mdss_mdp: mdp@ae01000 {
> + compatible = "qcom,sdm845-dpu";
> + reg = <0 0x0ae01000 0 0x8f000>,
> + <0 0x0aeb0000 0 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "iface", "bus", "core", "vsync";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <300000000>,
> + <19200000>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dpu_intf1_out: endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dpu_intf2_out: endpoint {
> + remote-endpoint = <&dsi1_in>;
> + };
> + };
> + };
> + };
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml
> new file mode 100644
> index 0000000..4727205
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml
> @@ -0,0 +1,362 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dsi-sc7180.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Description of Qualcomm Display DSI interface dt properties.
> +
> +maintainers:
> + - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
> +
> +description: |
> + Device tree bindings for DSI controller and DSI PHY for SC7180 target.
> +
> +properties:
> + "dsi-controller":
> + type: object
> + description: Node containing the properties of DSI controller.
> +
> + properties:
> + compatible:
> + items:
> + - const: qcom,mdss-dsi-ctrl
> +
> + reg:
> + description: Physical base address and length of registers of controller.
> +
> + reg-names:
> + description: |
> + Names for different register regions defined above. The required region
> + is mentioned below.
> + items:
> + - const: dsi_ctrl
> +
> + clocks:
> + description: Phandles to device clocks.
> +
> + clock-names:
> + description: |
> + Device clock names in the same order as mentioned in clocks property.
> + The required clocks are mentioned below. For DSIv2, we need an
> + additional clock "src" and for DSI6G v2.0 onwards we need
> + "byte_intf" clock.
> + items:
> + - const: iface
> + - const: bus
> + - const: byte
> + - const: pixel
> + - const: core
> +
> + assigned-clocks:
> + description: Parents of "byte" and "pixel" for the given platform.
> +
> + assigned-clock-parents:
> + description: |
> + The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
> + Details on clock bindings are mentioned in
> + Documentation/devicetree/bindings/clock/clock-bindings.txt.
> +
> + vdd-supply:
> + description: Phandle to vdd regulator device node.
> +
> + vddio-supply:
> + description: Phandle to vdd-io regulator device node.
> +
> + vdda-supply:
> + description: Phandle to vdda regulator device node.
> +
> + phys:
> + description: Phandle to DSI PHY device node.
> +
> + phy-names:
> + description: Name of the corresponding PHY device.
> +
> + syscon-sfpb:
> + description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> +
> + ports:
> + description: |
> + Contains 2 DSI controller ports as child nodes. Each port contains
> + an endpoint subnode as defined in
> + Documentation/devicetree/bindings/graph.txt and
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> + properties:
> + description: |
> + The optional properties for DSI controller are mentioned below.
> +
> + panel@0:
> + description: |
> + Node of panel connected to this DSI controller.
> + See files in Documentation/devicetree/bindings/display/panel/
> + for each supported panel.
> +
> + qcom,dual-dsi-mode:
> + description: |
> + Boolean value indicating if the DSI controller is
> + driving a panel which needs 2 DSI links.
> +
> + qcom,master-dsi:
> + description: |
> + Boolean value indicating if the DSI controller is driving
> + the master link of the 2-DSI panel.
> +
> + qcom,sync-dual-dsi:
> + description: |
> + Boolean value indicating if the DSI controller is driving a
> + 2-DSI panel whose 2 links need receive command simultaneously.
> +
> + pinctrl-names:
> + description: The pin control state names; should contain "default"
> +
> + pinctrl-0:
> + description: The default pinctrl state (active)
> +
> + pinctrl-n:
> + description: The "sleep" pinctrl state
> +
> + ports:
> + description: |
> + Contains DSI controller input and output ports as children, each
> + containing one endpoint subnode.
> +
> + properties:
> + description: DSI Endpoint properties
> +
> + remote-endpoint:
> + description: |
> + For port@0, set to phandle of the connected panel/bridge's
> + input endpoint. For port@1, set to the MDP interface output.
> + See Documentation/devicetree/bindings/graph.txt for
> + device graph info.
> +
> + data-lanes:
> + description: |
> + This describes how the physical DSI data lanes are mapped
> + to the logical lanes on the given platform. The value contained in
> + index n describes what physical lane is mapped to the logical lane n
> + (DATAn, where n lies between 0 and 3). The clock lane position is fixed
> + and can't be changed. Hence, they aren't a part of the DT bindings. See
> + Documentation/devicetree/bindings/media/video-interfaces.txt for
> + more info on the data-lanes property.
> +
> + For example:
> +
> + data-lanes = <3 0 1 2>;
> +
> + The above mapping describes that the logical data lane DATA0 is mapped
> + to the physical data lane DATA3, logical DATA1 to physical DATA0,
> + logic DATA2 to phys DATA1 and logic DATA3 to phys DATA2. There are
> + only a limited number of physical to logical mappings possible.
> + oneOf:
> + - const: <0 1 2 3>
> + - const: <1 2 3 0>
> + - const: <2 3 0 1>
> + - const: <3 0 1 2>
> + - const: <0 3 2 1>
> + - const: <1 0 3 2>
> + - const: <2 1 0 3>
> + - const: <3 2 1 0>
> +
> + qcom,mdss-mdp-transfer-time-us:
> + description: |
> + Specifies the DSI transfer time for command mode
> + panels in microseconds. Driver uses this number to adjust
> + the clock rate according to the expected transfer time.
> + Increasing this value would slow down the mdp processing
> + and can result in slower performance.
> + Decreasing this value can speed up the mdp processing,
> + but this can also impact power consumption.
> + As a rule this time should not be higher than the time
> + that would be expected with the processing at the
> + DSI link rate since anyways this would be the maximum
> + transfer time that could be achieved.
> + If ping pong split is enabled, this time should not be higher
> + than two times the DSI link rate time.
> + If the property is not specified, then the default value is
> + 14000 us. This is an optional property.
> +
> + "dsi_phy":
> + type: object
> + description: Node containing the properties of DSI PHY
> +
> + properties:
> + compatible:
> + oneOf:
> + - const: qcom,dsi-phy-28nm-hpm
> + - const: qcom,dsi-phy-28nm-lp
> + - const: qcom,dsi-phy-20nm
> + - const: qcom,dsi-phy-28nm-8960
> + - const: qcom,dsi-phy-14nm
> + - const: qcom,dsi-phy-10nm
> + - const: qcom,dsi-phy-10nm-8998
> +
> + reg:
> + description: |
> + Physical base address and length of the registers of PLL, PHY. Some
> + revisions require the PHY regulator base address, whereas others
> + require the PHY lane base address. See below for each PHY revision.
> +
> + reg-names:
> + description: Name of register regions.
> + oneOf:
> + - description: |
> + Following regions are required for DSI 28nm HPM/LP/8960 PHYs and
> + 20nm PHY.
> + items:
> + - const: dsi_pll
> + - const: dsi_phy
> + - const: dsi_phy_regulator
> +
> + - description: |
> + Following regions are required for DSI 14nm and 10nm PHYs:
> + items:
> + - const: dsi_pll
> + - const: dsi_phy
> + - const: dsi_phy_lane
> +
> + clock-cells:
> + description: |
> + The DSI PHY block acts as a clock provider, creating
> + 2 clocks: A byte clock (index 0), and a pixel clock (index 1).
> + const: 1
> +
> + power-domains:
> + description: Should be <&mmcc MDSS_GDSC>.
> +
> + clocks:
> + description: |
> + Phandles to device clocks. See
> + Documentation/devicetree/bindings/clock/clock-bindings.txt
> + for details on clock bindings.
> +
> + clock-names:
> + description: |
> + The following clocks are required.
> + "iface"
> + "ref" (only required for new DTS files/entries)
> +
> + vddio-supply:
> + description: |
> + Phandle to vdd-io regulator device node. Required for 28nm HPM/LP,
> + 28nm 8960 PHYs and 20nm PHY.
> +
> + vcca-supply:
> + description: |
> + Phandle to vcca regulator device node. Required for 20nm PHY and
> + 10nm PHY.
> +
> + vdds-supply:
> + description: |
> + Phandle to vdds regulator device node. Required for 10nm PHY.
> +
> + properties:
> + description: |
> + The optional properties for DSI PHY are mentioned below.
> +
> + qcom,dsi-phy-regulator-ldo-mode:
> + description: |
> + Boolean value indicating if the LDO mode PHY regulator is wanted.
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
> + #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> +
> + dsi0: dsi@fd922800 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + qcom,dsi-host-index = <0>;
> + interrupt-parent = <&mdp>;
> + interrupts = <4 0>;
> + reg-names = "dsi_ctrl";
> + reg = <0xfd922800 0x200>;
> + power-domains = <&mmcc MDSS_GDSC>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&dsi_phy0 0>,
> + <&dsi_phy0 1>;
> +
> + vdda-supply = <&pma8084_l2>;
> + vdd-supply = <&pma8084_l22>;
> + vddio-supply = <&pma8084_l12>;
> +
> + phys = <&dsi_phy0>;
> + phy-names ="dsi-phy";
> +
> + qcom,dual-dsi-mode;
> + qcom,master-dsi;
> + qcom,sync-dual-dsi;
> +
> + qcom,mdss-mdp-transfer-time-us = <12000>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&dsi_active>;
> + pinctrl-1 = <&dsi_suspend>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dsi0_in: endpoint {
> + remote-endpoint = <&mdp_intf1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> +
> + panel: panel@0 {
> + compatible = "sharp,lq101r1sx01";
> + link2 = <&secondary>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> + };
> + };
> +
> + dsi_phy0: dsi-phy@fd922a00 {
> + compatible = "qcom,dsi-phy-28nm-hpm";
> + qcom,dsi-phy-index = <0>;
> + reg-names =
> + "dsi_pll",
> + "dsi_phy",
> + "dsi_phy_regulator";
> + reg = <0xfd922a00 0xd4>,
> + <0xfd922b00 0x2b0>,
> + <0xfd922d80 0x7b>;
> + clock-names = "iface";
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> + vddio-supply = <&pma8084_l12>;
> +
> + qcom,dsi-phy-regulator-ldo-mode;
> + };
> +...
> +
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml
> new file mode 100644
> index 0000000..e494a7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml
> @@ -0,0 +1,362 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dsi-sdm845.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Description of Qualcomm Display DSI interface dt properties.
> +
> +maintainers:
> + - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
> +
> +description: |
> + Device tree bindings for DSI controller and DSI PHY for SDM845 target.
> +
> +properties:
> + "dsi-controller":
> + type: object
> + description: Node containing the properties of DSI controller.
> +
> + properties:
> + compatible:
> + items:
> + - const: qcom,mdss-dsi-ctrl
> +
> + reg:
> + description: Physical base address and length of registers of controller.
> +
> + reg-names:
> + description: |
> + Names for different register regions defined above. The required region
> + is mentioned below.
> + items:
> + - const: dsi_ctrl
> +
> + clocks:
> + description: Phandles to device clocks.
> +
> + clock-names:
> + description: |
> + Device clock names in the same order as mentioned in clocks property.
> + The required clocks are mentioned below. For DSIv2, we need an
> + additional clock "src" and for DSI6G v2.0 onwards we need
> + "byte_intf" clock.
> + items:
> + - const: iface
> + - const: bus
> + - const: byte
> + - const: pixel
> + - const: core
> +
> + assigned-clocks:
> + description: Parents of "byte" and "pixel" for the given platform.
> +
> + assigned-clock-parents:
> + description: |
> + The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
> + Details on clock bindings are mentioned in
> + Documentation/devicetree/bindings/clock/clock-bindings.txt.
> +
> + vdd-supply:
> + description: Phandle to vdd regulator device node.
> +
> + vddio-supply:
> + description: Phandle to vdd-io regulator device node.
> +
> + vdda-supply:
> + description: Phandle to vdda regulator device node.
> +
> + phys:
> + description: Phandle to DSI PHY device node.
> +
> + phy-names:
> + description: Name of the corresponding PHY device.
> +
> + syscon-sfpb:
> + description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> +
> + ports:
> + description: |
> + Contains 2 DSI controller ports as child nodes. Each port contains
> + an endpoint subnode as defined in
> + Documentation/devicetree/bindings/graph.txt and
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> + properties:
> + description: |
> + The optional properties for DSI controller are mentioned below.
> +
> + panel@0:
> + description: |
> + Node of panel connected to this DSI controller.
> + See files in Documentation/devicetree/bindings/display/panel/
> + for each supported panel.
> +
> + qcom,dual-dsi-mode:
> + description: |
> + Boolean value indicating if the DSI controller is
> + driving a panel which needs 2 DSI links.
> +
> + qcom,master-dsi:
> + description: |
> + Boolean value indicating if the DSI controller is driving
> + the master link of the 2-DSI panel.
> +
> + qcom,sync-dual-dsi:
> + description: |
> + Boolean value indicating if the DSI controller is driving a
> + 2-DSI panel whose 2 links need receive command simultaneously.
> +
> + pinctrl-names:
> + description: The pin control state names; should contain "default"
> +
> + pinctrl-0:
> + description: The default pinctrl state (active)
> +
> + pinctrl-n:
> + description: The "sleep" pinctrl state
> +
> + ports:
> + description: |
> + Contains DSI controller input and output ports as children, each
> + containing one endpoint subnode.
> +
> + properties:
> + description: DSI Endpoint properties
> +
> + remote-endpoint:
> + description: |
> + For port@0, set to phandle of the connected panel/bridge's
> + input endpoint. For port@1, set to the MDP interface output.
> + See Documentation/devicetree/bindings/graph.txt for
> + device graph info.
> +
> + data-lanes:
> + description: |
> + This describes how the physical DSI data lanes are mapped
> + to the logical lanes on the given platform. The value contained in
> + index n describes what physical lane is mapped to the logical lane n
> + (DATAn, where n lies between 0 and 3). The clock lane position is fixed
> + and can't be changed. Hence, they aren't a part of the DT bindings. See
> + Documentation/devicetree/bindings/media/video-interfaces.txt for
> + more info on the data-lanes property.
> +
> + For example:
> +
> + data-lanes = <3 0 1 2>;
> +
> + The above mapping describes that the logical data lane DATA0 is mapped
> + to the physical data lane DATA3, logical DATA1 to physical DATA0,
> + logic DATA2 to phys DATA1 and logic DATA3 to phys DATA2. There are
> + only a limited number of physical to logical mappings possible.
> + oneOf:
> + - const: <0 1 2 3>
> + - const: <1 2 3 0>
> + - const: <2 3 0 1>
> + - const: <3 0 1 2>
> + - const: <0 3 2 1>
> + - const: <1 0 3 2>
> + - const: <2 1 0 3>
> + - const: <3 2 1 0>
> +
> + qcom,mdss-mdp-transfer-time-us:
> + description: |
> + Specifies the DSI transfer time for command mode
> + panels in microseconds. Driver uses this number to adjust
> + the clock rate according to the expected transfer time.
> + Increasing this value would slow down the mdp processing
> + and can result in slower performance.
> + Decreasing this value can speed up the mdp processing,
> + but this can also impact power consumption.
> + As a rule this time should not be higher than the time
> + that would be expected with the processing at the
> + DSI link rate since anyways this would be the maximum
> + transfer time that could be achieved.
> + If ping pong split is enabled, this time should not be higher
> + than two times the DSI link rate time.
> + If the property is not specified, then the default value is
> + 14000 us. This is an optional property.
> +
> + "dsi_phy":
> + type: object
> + description: Node containing the properties of DSI PHY
> +
> + properties:
> + compatible:
> + oneOf:
> + - const: qcom,dsi-phy-28nm-hpm
> + - const: qcom,dsi-phy-28nm-lp
> + - const: qcom,dsi-phy-20nm
> + - const: qcom,dsi-phy-28nm-8960
> + - const: qcom,dsi-phy-14nm
> + - const: qcom,dsi-phy-10nm
> + - const: qcom,dsi-phy-10nm-8998
> +
> + reg:
> + description: |
> + Physical base address and length of the registers of PLL, PHY. Some
> + revisions require the PHY regulator base address, whereas others
> + require the PHY lane base address. See below for each PHY revision.
> +
> + reg-names:
> + description: Name of register regions.
> + oneOf:
> + - description: |
> + Following regions are required for DSI 28nm HPM/LP/8960 PHYs and
> + 20nm PHY.
> + items:
> + - const: dsi_pll
> + - const: dsi_phy
> + - const: dsi_phy_regulator
> +
> + - description: |
> + Following regions are required for DSI 14nm and 10nm PHYs:
> + items:
> + - const: dsi_pll
> + - const: dsi_phy
> + - const: dsi_phy_lane
> +
> + clock-cells:
> + description: |
> + The DSI PHY block acts as a clock provider, creating
> + 2 clocks: A byte clock (index 0), and a pixel clock (index 1).
> + const: 1
> +
> + power-domains:
> + description: Should be <&mmcc MDSS_GDSC>.
> +
> + clocks:
> + description: |
> + Phandles to device clocks. See
> + Documentation/devicetree/bindings/clock/clock-bindings.txt
> + for details on clock bindings.
> +
> + clock-names:
> + description: |
> + The following clocks are required.
> + "iface"
> + "ref" (only required for new DTS files/entries)
> +
> + vddio-supply:
> + description: |
> + Phandle to vdd-io regulator device node. Required for 28nm HPM/LP,
> + 28nm 8960 PHYs and 20nm PHY.
> +
> + vcca-supply:
> + description: |
> + Phandle to vcca regulator device node. Required for 20nm PHY and
> + 10nm PHY.
> +
> + vdds-supply:
> + description: |
> + Phandle to vdds regulator device node. Required for 10nm PHY.
> +
> + properties:
> + description: |
> + The optional properties for DSI PHY are mentioned below.
> +
> + qcom,dsi-phy-regulator-ldo-mode:
> + description: |
> + Boolean value indicating if the LDO mode PHY regulator is wanted.
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +
> + dsi0: dsi@fd922800 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + qcom,dsi-host-index = <0>;
> + interrupt-parent = <&mdp>;
> + interrupts = <4 0>;
> + reg-names = "dsi_ctrl";
> + reg = <0xfd922800 0x200>;
> + power-domains = <&mmcc MDSS_GDSC>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&dsi_phy0 0>,
> + <&dsi_phy0 1>;
> +
> + vdda-supply = <&pma8084_l2>;
> + vdd-supply = <&pma8084_l22>;
> + vddio-supply = <&pma8084_l12>;
> +
> + phys = <&dsi_phy0>;
> + phy-names ="dsi-phy";
> +
> + qcom,dual-dsi-mode;
> + qcom,master-dsi;
> + qcom,sync-dual-dsi;
> +
> + qcom,mdss-mdp-transfer-time-us = <12000>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&dsi_active>;
> + pinctrl-1 = <&dsi_suspend>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dsi0_in: endpoint {
> + remote-endpoint = <&mdp_intf1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> +
> + panel: panel@0 {
> + compatible = "sharp,lq101r1sx01";
> + link2 = <&secondary>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> + };
> + };
> +
> + dsi_phy0: dsi-phy@fd922a00 {
> + compatible = "qcom,dsi-phy-28nm-hpm";
> + qcom,dsi-phy-index = <0>;
> + reg-names =
> + "dsi_pll",
> + "dsi_phy",
> + "dsi_phy_regulator";
> + reg = <0xfd922a00 0xd4>,
> + <0xfd922b00 0x2b0>,
> + <0xfd922d80 0x7b>;
> + clock-names = "iface";
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> + vddio-supply = <&pma8084_l12>;
> +
> + qcom,dsi-phy-regulator-ldo-mode;
> + };
> +...
> +
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel