Re: [PATCH 3/3] dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML

[Rob Herring]

On Mon, Mar 02, 2020 at 06:39:53PM -0300, Paul Cercueil wrote:
> Convert the jz4740-rtc doc to YAML, and update it to reflect the new
> changes in the driver:
> - More compatible strings are specified, with fallbacks if needed,
> - The vendor-specific properties are now properly prefixed with the
>   'ingenic,' prefix.
> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
>  .../bindings/rtc/ingenic,jz4740-rtc.txt       | 37 --------
>  .../devicetree/bindings/rtc/ingenic,rtc.yaml  | 87 +++++++++++++++++++
>  2 files changed, 87 insertions(+), 37 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
>  create mode 100644 Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
> deleted file mode 100644
> index 41c7ae18fd7b..000000000000
> --- a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -JZ4740 and similar SoCs real-time clock driver
> -
> -Required properties:
> -
> -- compatible: One of:
> -  - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC
> -  - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC
> -- reg: Address range of rtc register set
> -- interrupts: IRQ number for the alarm interrupt
> -- clocks: phandle to the "rtc" clock
> -- clock-names: must be "rtc"
> -
> -Optional properties:
> -- system-power-controller: To use this component as the
> -  system power controller
> -- reset-pin-assert-time-ms: Reset pin low-level assertion
> -  time after wakeup (default 60ms; range 0-125ms if RTC clock
> -  at 32 kHz)
> -- min-wakeup-pin-assert-time-ms: Minimum wakeup pin assertion
> -  time (default 100ms; range 0-2s if RTC clock at 32 kHz)
> -
> -Example:
> -
> -rtc@10003000 {
> -	compatible = "ingenic,jz4740-rtc";
> -	reg = <0x10003000 0x40>;
> -
> -	interrupt-parent = <&intc>;
> -	interrupts = <32>;
> -
> -	clocks = <&rtc_clock>;
> -	clock-names = "rtc";
> -
> -	system-power-controller;
> -	reset-pin-assert-time-ms = <60>;
> -	min-wakeup-pin-assert-time-ms = <100>;
> -};
> diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
> new file mode 100644
> index 000000000000..c18ed8ac263f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ingenic SoCs Real-Time Clock DT bindings
> +
> +maintainers:
> +  - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +        - ingenic,jz4740-rtc
> +        - ingenic,jz4760-rtc
> +      - items:
> +        - const: ingenic,jz4725b-rtc
> +        - const: ingenic,jz4740-rtc
> +      - items:
> +        - enum:
> +          - ingenic,jz4770-rtc
> +          - ingenic,jz4780-rtc
> +        - const: ingenic,jz4760-rtc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: rtc
> +
> +  system-power-controller:
> +    description: |
> +      Indicates that the RTC is responsible for powering OFF
> +      the system.
> +    type: boolean
> +
> +  ingenic,reset-pin-assert-time-ms:
> +    description: |
> +      Reset pin low-level assertion time after wakeup
> +      (assuming RTC clock at 32 kHz)
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32

You can drop this because standard units have a type already.

> +      - minimum: 0
> +      - maximum: 125
> +      - default: 60

And then move all there out of allOf.

> +
> +  ingenic,min-wakeup-pin-assert-time-ms:
> +    description: |
> +      Minimum wakeup pin assertion time
> +      (assuming RTC clock at 32 kHz)
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +      - maximum: 2000
> +      - default: 100
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/jz4740-cgu.h>
> +    rtc_dev: rtc@10003000 {
> +      compatible = "ingenic,jz4740-rtc";
> +      reg = <0x10003000 0x40>;
> +
> +      interrupt-parent = <&intc>;
> +      interrupts = <15>;
> +
> +      clocks = <&cgu JZ4740_CLK_RTC>;
> +      clock-names = "rtc";
> +    };
> -- 
> 2.25.1
>