linux-next: manual merge of the net-next tree with the net tree
From: Stephen Rothwell
Date: Tue Mar 10 2020 - 21:33:32 EST
Hi all,
Today's linux-next merge of the net-next tree got a conflict in:
drivers/net/ethernet/mscc/ocelot.c
between commit:
a8015ded89ad ("net: mscc: ocelot: properly account for VLAN header length when setting MRU")
from the net tree and commit:
69df578c5f4b ("net: mscc: ocelot: eliminate confusion between CPU and NPI port")
from the net-next tree.
I fixed it up (I think - see below) and can carry the fix as
necessary. This is now fixed as far as linux-next is concerned, but any
non trivial conflicts should be mentioned to your upstream maintainer
when your tree is submitted for merging. You may also want to consider
cooperating with the maintainer of the conflicting tree to minimise any
particularly complex conflicts.
--
Cheers,
Stephen Rothwell
diff --cc drivers/net/ethernet/mscc/ocelot.c
index d3b7373c5961,06f9d013f807..000000000000
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@@ -2310,27 -2323,34 +2329,34 @@@ void ocelot_configure_cpu(struct ocelo
ANA_PORT_PORT_CFG_PORTID_VAL(cpu),
ANA_PORT_PORT_CFG, cpu);
- /* If the CPU port is a physical port, set up the port in Node
- * Processor Interface (NPI) mode. This is the mode through which
- * frames can be injected from and extracted to an external CPU.
- * Only one port can be an NPI at the same time.
- */
- if (cpu < ocelot->num_phys_ports) {
+ if (npi >= 0 && npi < ocelot->num_phys_ports) {
- int mtu = VLAN_ETH_FRAME_LEN + OCELOT_TAG_LEN;
+ int sdu = ETH_DATA_LEN + OCELOT_TAG_LEN;
ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
- QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu),
+ QSYS_EXT_CPU_CFG_EXT_CPU_PORT(npi),
QSYS_EXT_CPU_CFG);
if (injection == OCELOT_TAG_PREFIX_SHORT)
- mtu += OCELOT_SHORT_PREFIX_LEN;
+ sdu += OCELOT_SHORT_PREFIX_LEN;
else if (injection == OCELOT_TAG_PREFIX_LONG)
- mtu += OCELOT_LONG_PREFIX_LEN;
+ sdu += OCELOT_LONG_PREFIX_LEN;
- ocelot_port_set_maxlen(ocelot, cpu, sdu);
- ocelot_port_set_mtu(ocelot, npi, mtu);
++ ocelot_port_set_maxlen(ocelot, npi, sdu);
+
+ /* Enable NPI port */
+ ocelot_write_rix(ocelot,
+ QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
+ QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
+ QSYS_SWITCH_PORT_MODE_PORT_ENA,
+ QSYS_SWITCH_PORT_MODE, npi);
+ /* NPI port Injection/Extraction configuration */
+ ocelot_write_rix(ocelot,
+ SYS_PORT_MODE_INCL_XTR_HDR(extraction) |
+ SYS_PORT_MODE_INCL_INJ_HDR(injection),
+ SYS_PORT_MODE, npi);
}
- /* CPU port Injection/Extraction configuration */
+ /* Enable CPU port module */
ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
QSYS_SWITCH_PORT_MODE_PORT_ENA,
Attachment:
pgp0shAheUbSU.pgp
Description: OpenPGP digital signature