Re: [PATCH v3 03/32] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2

[Robert Richter]

Hi Marc,

On 10.03.20 11:41:09, Marc Zyngier wrote:
> On 2020-03-09 22:11, Robert Richter wrote:
> > On 24.12.19 11:10:26, Marc Zyngier wrote:

> > > @@ -1502,6 +1512,12 @@ static const struct gic_quirk gic_quirks[] = {
> > >  		.mask	= 0xffffffff,
> > >  		.init	= gic_enable_quirk_hip06_07,
> > >  	},
> > > +	{
> > > +		.desc	= "GICv3: Cavium TX1 GICD_TYPER2 erratum",
> > 
> > There is no errata number yet.
> 
> Please let me know when/if you obtain one.

GIC-38539: GIC faults when accessing reserved GICD_TYPER2 register

Applies to (covered with iidr mask below):

 ThunderX: CN88xx
 OCTEON TX: CN83xx, CN81xx
 OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx*

Issue: Access to GIC reserved registers results in an exception.
Notes:
1) This applies to other reserved registers too.
2) The errata number is unique over all IP blocks, so a macro
   CAVIUM_ERRATUM_38539 is ok.

> 
> > 
> > > +		.iidr	= 0xa100034c,
> > > +		.mask	= 0xfff00fff,
> > > +		.init	= gic_enable_quirk_tx1,
> > 
> > All TX1 and OcteonTX parts are affected, which is a0-a7 and b0-b7. So
> > the iidr/mask should be:
> > 
> > 		.iidr   = 0xa000034c,
> > 		.mask   = 0xe8f00fff,
> 
> Thanks, that's pretty helpful. I'll update the patch with these values
> and the corresponding description.
> 
> > > +	},
> > >  	{
> > >  	}
> > >  };

Thank you for addressing this.

-Robert