Re: [PATCH 2/3] dt-bindings: leds: Add binding for sgm3140

[Dan Murphy]

Luca

On 3/9/20 3:35 PM, Luca Weiss wrote:
> Add YAML devicetree binding for SGMICRO SGM3140 charge pump used for
> camera flash LEDs.
>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
> Changes since RFC:
> - new patch
>
> I'm not sure about the completeness of this binding as it doesn't
> mention the led subnode at all.
> The only existing led yaml binding is leds/leds-max77650.yaml which
> mentions the subnode but duplicates properties from documented in
> leds/common.txt.
>
>   .../bindings/leds/leds-sgm3140.yaml           | 53 +++++++++++++++++++
>   1 file changed, 53 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
> new file mode 100644
> index 000000000000..be9384573d02
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-sgm3140.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SGMICRO SGM3140 500mA Buck/Boost Charge Pump LED Driver
> +
> +maintainers:
> +  - Luca Weiss <luca@xxxxxxxxx>
> +
> +description: |
> +  The SGM3140 is a current-regulated charge pump which can regulate two current
> +  levels for Flash and Torch modes.
> +
> +  It is controlled with two GPIO pins.
Please define "It". Not sure what is controlled here.


Dan