Re: [v1 2/3] media: ov8856: Add devicetree support

[Robert Foss]

Hey Sakari,

On Wed, 11 Mar 2020 at 12:49, Sakari Ailus <sakari.ailus@xxxxxx> wrote:
>
> Hi Robert,
>
> On Tue, Mar 10, 2020 at 04:55:20PM +0100, Robert Foss wrote:
> > Hi Andy,
> >
> > On Tue, 10 Mar 2020 at 15:26, Andy Shevchenko
> > <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
> > >
> > > On Tue, Mar 10, 2020 at 02:46:02PM +0100, Robert Foss wrote:
> > > > Add devicetree match table, and enable ov8856_probe()
> > > > to initialize power, clocks and reset pins.
> > >
> > > ...
> > >
> > > > +#define OV8856_NUM_SUPPLIES ARRAY_SIZE(ov8856_supply_names)
> > >
> > > Use ARRAY_SIZE() directly.
> >
> > Ack.
> >
> > >
> > > Have you seen Sakari's comments?
> > > Sakari, do I have dÃjÄ vu or you indeed commented this driver?
> >
> > Yes, I may have missed some part of it, so please tell me if I have.
> >
> > There is a patchset floating around that implements a larger chunk of
> > functionality,
> > including a couple of new modes. This is based on that series.
>
> Please see earlier comments given against an earlier variant of this set.
> They're on LMML.
>
> >
> > >
> > > ...
> > >
> > > > +     gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> > >
> > > > +     gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_HIGH);
> > >
> > > Yes, seems this one is inverted.
> > >
> > > ...
> > >
> > > > +{
> > > > +     gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> > > > +     regulator_bulk_disable(OV8856_NUM_SUPPLIES, ov8856->supplies);
> > > > +     clk_disable_unprepare(ov8856->xvclk);
> > > > +}
> > > > +
> > > > +
> > >
> > > One blank line is enough.
> > >
> > > ...
> > >
> > > > +     ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
> > > > +     if (IS_ERR(ov8856->xvclk)) {
> > > > +             dev_err(&client->dev, "failed to get xvclk\n");
> > > > +             return -EINVAL;
> > > > +     }
> > >
> > > Previously it worked without clock provider, now you make a dependency.
> > >
> > > This won't work.
> >
> > So the ideal behavior would be to only use the xclk if it is provided?
>
> See e.g. the smiapp driver on how to do this so it continues to work on
> ACPI.

Thanks for the pointer!

>
> I think it'd be also appropriate to add the usleep() after lifting reset
> only if the reset GPIO is defined for the device.

Ack