RE: [EXT] Re: [PATCH v6 0/6] Add new series Micron SPI NAND devices

[Shivamurthy Shastri (sshivamurthy)]

Hi Miquel,

> 
> Hi Shiva,
> 
> shiva.linuxworks@xxxxxxxxx wrote on Mon,  9 Mar 2020 12:52:24 +0100:
> 
> > From: Shivamurthy Shastri <sshivamurthy@xxxxxxxxxx>
> >
> > This patchset is for the new series of Micron SPI NAND devices, and the
> > following links are their datasheets.
> >
> > M78A:
> > [1] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
> > [2] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf
> >
> > M79A:
> > [3] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
> > [4] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf
> >
> > M70A:
> > [5] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
> > [6] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
> > [7] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
> > [8] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf
> >
> > Changes since v5:
> > -----------------
> >
> > 1. Rebased series to v5.6-rc1.
> 
> I am very sorry but actually I had issues applying all your patches not
> because they were not based on v5.6-rc1, but because since then I
> applied a patch changing the detection that changed the content of a
> lot of structures (including in Micron's patches).
> 
> Can you please rebase again on top of the current nand/next? I am very
> sorry for this extra work, this is my mistake.
> 
> Head should be:
> 
> 	a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu
> for dma transfers")
> 
> And the culprit commit is:
> 
> 	f1541773af49 ("mtd: spinand: rework detect procedure for different
> READ_ID operation")


I will rebase and send the patches.
Meanwhile, there will be small code change because of the READ_ID patch.

Do I need to drop Reviewed-by from Boris?

Thanks,
Shiva