Re: [PATCH v7 00/48] atmel_mxt_ts misc

From: Dmitry Osipenko
Date: Thu Mar 12 2020 - 11:22:01 EST


12.02.2020 11:41, Jiada Wang ÐÐÑÐÑ:
> This patch-set forward ports Nick Dyer's work in ndyer/linux github repository
> as long as some other features and fixes
>
> Balasubramani Vivekanandan (2):
> Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c
> transaction
> Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin
>
> Dean Jenkins (1):
> Input: atmel_mxt_ts: return error from
> mxt_process_messages_until_invalid()
>
> Deepak Das (6):
> Input: Atmel: improve error handling in mxt_start()
> Input: Atmel: improve error handling in mxt_initialize()
> Input: Atmel: improve error handling in mxt_update_cfg()
> Input: Atmel: Improve error handling in mxt_initialize_input_device()
> Input: Atmel: handle ReportID "0x00" while processing T5 messages
> Input: Atmel: use T44 object to process T5 messages
>
> George G. Davis (1):
> input: atmel_mxt_ts: export GPIO reset line via sysfs
>
> Jiada Wang (3):
> Input: introduce input_mt_report_slot_inactive
> Input: atmel_mxt_ts - eliminate data->raw_info_block
> Input: atmel_mxt_ts - Fix compilation warning
>
> Karl Tsou (1):
> Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs
>
> Kautuk Consul (2):
> Input: atmel_mxt_ts - Change call-points of mxt_free_* functions
> Input: atmel_mxt_ts - rely on calculated_crc rather than file
> config_crc
>
> Naveen Chakka (2):
> input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen
> status
> input: atmel_mxt_ts: added sysfs interface to update atmel T38 data
>
> Nick Dyer (26):
> Input: atmel_mxt_ts - rework sysfs init/remove
> Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when
> necessary
> Input: atmel_mxt_ts - split large i2c transfers into blocks
> Input: atmel_mxt_ts - output status from T48 Noise Supression
> Input: atmel_mxt_ts - output status from T42 Touch Suppression
> Input: atmel_mxt_ts - implement T9 vector/orientation support
> Input: atmel_mxt_ts - implement T15 Key Array support
> Input: atmel_mxt_ts - handle reports from T47 Stylus object
> Input: atmel_mxt_ts - implement support for T107 active stylus
> Input: atmel_mxt_ts - release touch state during suspend
> Input: atmel_mxt_ts - add regulator control support
> Input: atmel_mxt_ts - report failures in suspend/resume
> Input: atmel_mxt_ts - allow specification of firmware file name
> Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs
> Input: atmel_mxt_ts - allow input name to be specified in platform
> data
> Input: atmel_mxt_ts - refactor firmware flash to extract context into
> struct
> Input: atmel_mxt_ts - refactor code to enter bootloader into separate
> func
> Input: atmel_mxt_ts - combine bootloader version query with probe
> Input: atmel_mxt_ts - improve bootloader state machine handling
> Input: atmel_mxt_ts - rename bl_completion to chg_completion
> Input: atmel_mxt_ts - make bootloader interrupt driven
> Input: atmel_mxt_ts - delay enabling IRQ when not using regulators
> Input: atmel_mxt_ts - implement I2C retries
> Input: atmel_mxt_ts - orientation is not present in hover
> Input: atmel_mxt_ts - implement debug output for messages
> Input: atmel_mxt_ts - implement improved debug message interface
>
> Nikhil Ravindran (1):
> Input: atmel_mxt_ts: Add support for run self-test routine.
>
> Sanjeev Chugh (1):
> Input: atmel_mxt_ts: Implement synchronization during various
> operation
>
> karl tsou (1):
> Input: atmel_mxt_ts - add config checksum attribute to sysfs
>
> keerthikumarp (1):
> input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel
> touch panel controller in detachable displays.
>
> ---
> v7:
> Fix regression found when updating firmware
> Following commits have been updated to fix regression found when
> updating firmware
> Input: atmel_mxt_ts - improve bootloader state machine handling
> Input: atmel_mxt_ts - make bootloader interrupt driven
> input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status
> Input: atmel_mxt_ts: Implement synchronization during various operation
>
> v6:
> Fix issue in commit ("Input: introduce input_mt_report_slot_inactive")
> reported by kernel test robot
>
> v5:
> Following commits have been updated to address warnings & errors
> reported by kbuild test robot
> Input: atmel_mxt_ts - make bootloader interrupt driven
> Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs
>
> Following commit has been updated
> Input: introduce input_mt_report_slot_inactive
>
> v4:
> Following commit in v3 patch-set has been removed
> Input: switch to use return value of input_mt_report_slot_state
>
> Following commit has been updated to address checkpatch warning
> Input: atmel_mxt_ts: Implement synchronization during various operation
>
> v3:
> Following commits have been updated compared to v2 patchset
> Input: atmel_mxt_ts - implement debug output for messages
> - added inline comment
> Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msg
> - changed dev_info() to dev_dbg()
>
> v2:
> Following commit in v1 patchset has been split into two commits
> Input: introduce input_mt_report_slot_inactive
>
> Following commits have been updated compared to v1 patchset
> Input: atmel_mxt_ts - split large i2c transfers into blocks
> Input: atmel_mxt_ts - output status from T42 Touch Suppression
>
> Following commits in v1 patchset have been squashed
> Input: touchscreen: Atmel: Add device tree support for T15 key array
> objects
> Input: atmel_mxt_ts - check data->input_dev is not null in
> mxt_input_sync()
> Input: atmel_mxt_ts - check firmware format before entering bootloader
> Input: atmel_mxt_ts: update stale use_retrigen_workaround flag
> input: atmel_mxt_ts: move bootloader probe from mxt_initialize()
> input: Atmel: limit the max bytes transferred while reading T5 messages
> Input: atmel_mxt_ts: Use msecs_to_jiffies() instead of HZ
> Input: atmel_mxt_ts: Use complete when in_bootloader true
> Input: atmel_mxt_ts: Prevent crash due to freeing of input device
> input: atmel_mxt_ts: Add NULL check for sysfs attribute debug_msg_attr
>
> Following commits in v1 patchset have been dropped:
> Input: atmel_mxt_ts - configure and use gpios as real gpios
> Input: touchscreen: Atmel: Enable IRQ_DISABLE_UNLAZY flag for interrupt
> Input: atmel_mxt_ts - add memory access interface via sysfs
> Input: atmel_mxt_ts: Remove sysfs attributes during driver detach
> Input: atmel_mxt_ts: Avoid race condition in freeing of input device
>
>
> v1: initial version
> ---
> .../bindings/input/atmel,maxtouch.txt | 14 +
> MAINTAINERS | 1 +
> drivers/hid/hid-alps.c | 3 +-
> drivers/hid/hid-multitouch.c | 6 +-
> drivers/input/misc/xen-kbdfront.c | 2 +-
> drivers/input/mouse/elan_i2c_core.c | 2 +-
> drivers/input/touchscreen/atmel_mxt_ts.c | 2270 ++++++++++++++---
> drivers/input/touchscreen/cyttsp4_core.c | 5 +-
> drivers/input/touchscreen/cyttsp_core.c | 2 +-
> drivers/input/touchscreen/melfas_mip4.c | 4 +-
> drivers/input/touchscreen/mms114.c | 2 +-
> drivers/input/touchscreen/raspberrypi-ts.c | 2 +-
> drivers/input/touchscreen/stmfts.c | 2 +-
> include/dt-bindings/input/atmel_mxt_ts.h | 22 +
> include/linux/input/mt.h | 5 +
> 15 files changed, 1985 insertions(+), 357 deletions(-)
> create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h
>

Hello Jiada,

Please run all the patches through `scripts/checkpatch.pl --strict` and
fix all the reported problems.

Otherwise this is a very good series, it makes MXT1386 to work because
I2C retying is indeed required for that controller.