[PATCH] spi: meson-spicc: setup IO line delay
From: Neil Armstrong
Date: Thu Mar 12 2020 - 09:31:28 EST
Now the controller can support frequencies higher than 30MHz, we need
the setup the I/O line delays in regard of the SPI clock frequency.
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200312133131.26430-7-narmstrong@xxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/spi/spi-meson-spicc.c | 61 ++++++++++++++++++++++++++++++++++-
1 file changed, 60 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index b5bd3a897e8f..4494a791f4a7 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -106,7 +106,21 @@
#define SPICC_SWAP_RO BIT(14) /* RX FIFO Data Swap Read-Only */
#define SPICC_SWAP_W1 BIT(15) /* RX FIFO Data Swap Write-Only */
#define SPICC_DLYCTL_RO_MASK GENMASK(20, 15) /* Delay Control Read-Only */
-#define SPICC_DLYCTL_W1_MASK GENMASK(21, 16) /* Delay Control Write-Only */
+#define SPICC_MO_DELAY_MASK GENMASK(17, 16) /* Master Output Delay */
+#define SPICC_MO_NO_DELAY 0
+#define SPICC_MO_DELAY_1_CYCLE 1
+#define SPICC_MO_DELAY_2_CYCLE 2
+#define SPICC_MO_DELAY_3_CYCLE 3
+#define SPICC_MI_DELAY_MASK GENMASK(19, 18) /* Master Input Delay */
+#define SPICC_MI_NO_DELAY 0
+#define SPICC_MI_DELAY_1_CYCLE 1
+#define SPICC_MI_DELAY_2_CYCLE 2
+#define SPICC_MI_DELAY_3_CYCLE 3
+#define SPICC_MI_CAP_DELAY_MASK GENMASK(21, 20) /* Master Capture Delay */
+#define SPICC_CAP_AHEAD_2_CYCLE 0
+#define SPICC_CAP_AHEAD_1_CYCLE 1
+#define SPICC_CAP_NO_DELAY 2
+#define SPICC_CAP_DELAY_1_CYCLE 3
#define SPICC_FIFORST_RO_MASK GENMASK(22, 21) /* FIFO Softreset Read-Only */
#define SPICC_FIFORST_W1_MASK GENMASK(23, 22) /* FIFO Softreset Write-Only */
@@ -328,6 +342,49 @@ static irqreturn_t meson_spicc_irq(int irq, void *data)
return IRQ_HANDLED;
}
+static void meson_spicc_auto_io_delay(struct meson_spicc_device *spicc)
+{
+ u32 div, hz;
+ u32 mi_delay, cap_delay;
+ u32 conf;
+
+ if (spicc->data->has_enhance_clk_div) {
+ div = FIELD_GET(SPICC_ENH_DATARATE_MASK,
+ readl_relaxed(spicc->base + SPICC_ENH_CTL0));
+ div++;
+ div <<= 1;
+ } else {
+ div = FIELD_GET(SPICC_DATARATE_MASK,
+ readl_relaxed(spicc->base + SPICC_CONREG));
+ div += 2;
+ div = 1 << div;
+ }
+
+ mi_delay = SPICC_MI_NO_DELAY;
+ cap_delay = SPICC_CAP_AHEAD_2_CYCLE;
+ hz = clk_get_rate(spicc->clk);
+
+ if (hz >= 100000000)
+ cap_delay = SPICC_CAP_DELAY_1_CYCLE;
+ else if (hz >= 80000000)
+ cap_delay = SPICC_CAP_NO_DELAY;
+ else if (hz >= 40000000)
+ cap_delay = SPICC_CAP_AHEAD_1_CYCLE;
+ else if (div >= 16)
+ mi_delay = SPICC_MI_DELAY_3_CYCLE;
+ else if (div >= 8)
+ mi_delay = SPICC_MI_DELAY_2_CYCLE;
+ else if (div >= 6)
+ mi_delay = SPICC_MI_DELAY_1_CYCLE;
+
+ conf = readl_relaxed(spicc->base + SPICC_TESTREG);
+ conf &= ~(SPICC_MO_DELAY_MASK | SPICC_MI_DELAY_MASK
+ | SPICC_MI_CAP_DELAY_MASK);
+ conf |= FIELD_PREP(SPICC_MI_DELAY_MASK, mi_delay);
+ conf |= FIELD_PREP(SPICC_MI_CAP_DELAY_MASK, cap_delay);
+ writel_relaxed(conf, spicc->base + SPICC_TESTREG);
+}
+
static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc,
struct spi_transfer *xfer)
{
@@ -346,6 +403,8 @@ static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc,
writel_relaxed(conf, spicc->base + SPICC_CONREG);
clk_set_rate(spicc->clk, xfer->speed_hz);
+
+ meson_spicc_auto_io_delay(spicc);
}
static int meson_spicc_transfer_one(struct spi_master *master,
--
2.20.1