Re: [PATCH v2 2/2] ARM: dts: imx6q-marsboard: properly define rgmii PHY

[Andrew Lunn]

On Fri, Mar 13, 2020 at 06:32:24AM +0100, Oleksij Rempel wrote:
> The Atheros AR8035 PHY can be autodetected but can't use interrupt
> support provided on this board. Define MDIO bus and the PHY node to make
> it work properly.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/imx6q-marsboard.dts | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
> index 84b30bd6908f..1f31d86a217b 100644
> --- a/arch/arm/boot/dts/imx6q-marsboard.dts
> +++ b/arch/arm/boot/dts/imx6q-marsboard.dts
> @@ -111,8 +111,21 @@ &fec {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_enet>;
>  	phy-mode = "rgmii-id";
> -	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
>  	status = "okay";

Hi Oleksij 

I don't see a phy-handle here. So is it still using phy_find_first()?

  Andrew