[v2 1/3] media: dt-bindings: ov8856: Document YAML bindings

[Robert Foss]

From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>

This patch adds documentation of device tree in YAML schema for the
OV8856 CMOS image sensor.

Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
---

- Changes since v4:
  * Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description
  * Add clock-lanes property to example
  * robher: Fix syntax error in devicetree example

- Changes since v3:
  * robher: Fix syntax error
  * robher: Removed maxItems
  * Fixes yaml 'make dt-binding-check' errors

- Changes since v2:
  Fixes comments from from Andy, Tomasz, Sakari, Rob.
  * Convert text documentation to YAML schema.

- Changes since v1:
  Fixes comments from Sakari, Tomasz
  * Add clock-frequency and link-frequencies in DT

 .../devicetree/bindings/media/i2c/ov8856.yaml | 133 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 134 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
new file mode 100644
index 000000000000..f5cb9add9277
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+
+maintainers:
+  - Ben Kao <ben.kao@xxxxxxxxx>
+  - Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
+
+description: |-
+  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface. This chip is programmable
+  through I2C and two-wire SCCB. The sensor output is available via CSI-2
+  serial data output (up to 4-lane).
+
+properties:
+  compatible:
+    const: ovti,ov8856
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: xvclk
+
+  clock-frequency:
+    description:
+      Frequency of the xvclk clock in Hertz.
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDOWN which is physically
+      active low.
+
+  port:
+    type: object
+    additionalProperties: false
+    description:
+      A node containing input and output port nodes with endpoint definitions
+      as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          clock-lanes:
+            maxItems: 1
+
+          data-lanes:
+            maxItems: 1
+
+          remote-endpoint: true
+
+        required:
+          - clock-lanes
+          - data-lanes
+          - remote-endpoint
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+
+    ov8856: camera-sensor@10 {
+        compatible = "ovti,ov8856";
+        reg = <0x10>;
+        reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&clk_24m_cam>;
+
+        clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+        clock-names = "xvclk";
+        clock-frequency = <19200000>;
+
+        avdd-supply = <&mt6358_vcama2_reg>;
+        dvdd-supply = <&mt6358_vcamd_reg>;
+        dovdd-supply = <&mt6358_vcamio_reg>;
+
+        port {
+            wcam_out: endpoint {
+                remote-endpoint = <&mipi_in_wcam>;
+                clock-lanes = <0>;
+                data-lanes = <1 2 3 4>;
+                link-frequencies = /bits/ 64 <360000000 180000000>;
+            };
+        };
+    };
+
+...
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index a6fbdf354d34..0f99e863978a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12355,6 +12355,7 @@ L:	linux-media@xxxxxxxxxxxxxxx
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/i2c/ov8856.c
+F:	Documentation/devicetree/bindings/media/i2c/ov8856.yaml
 
 OMNIVISION OV9650 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
-- 
2.20.1