Re: [v2 2/3] media: ov8856: Add devicetree support

[Fabio Estevam]

Hi Robert,

On Fri, Mar 13, 2020 at 8:04 AM Robert Foss <robert.foss@xxxxxxxxxx> wrote:

> +static int __ov8856_power_on(struct ov8856 *ov8856)
> +{
> +       struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +       int ret;
> +
> +       ret = clk_prepare_enable(ov8856->xvclk);
> +       if (ret < 0) {
> +               dev_err(&client->dev, "failed to enable xvclk\n");
> +               return ret;
> +       }
> +
> +       gpiod_set_value_cansleep(ov8856->reset_gpio, GPIOD_OUT_HIGH);

The parameter of gpiod_set_value_cansleep() is typically 0 (inactive
state) or 1 (active state), so:

 gpiod_set_value_cansleep(ov8856->reset_gpio, 1);

> +
> +       ret = regulator_bulk_enable(ARRAY_SIZE(ov8856_supply_names),
> +                                   ov8856->supplies);
> +       if (ret < 0) {
> +               dev_err(&client->dev, "failed to enable regulators\n");
> +               goto disable_clk;
> +       }
> +
> +       gpiod_set_value_cansleep(ov8856->reset_gpio, GPIOD_OUT_LOW);

and here it should be:

gpiod_set_value_cansleep(ov8856->reset_gpio, 0);

Also, don't you need a reset period between the two?