Re: [PATCH v2 5/5] arm64: dts: qcom: db845c: add analog audio support
From: Vinod Koul
Date: Fri Mar 13 2020 - 09:53:33 EST
On 12-03-20, 14:30, Srinivas Kandagatla wrote:
> This patch adds support to Analog audio via WSA881x speakers.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 159 +++++++++++++++++++++
> 1 file changed, 159 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 6e60e81f8db7..94aa9227ca51 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -8,6 +8,8 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
> +#include <dt-bindings/sound/qcom,q6asm.h>
> #include "sdm845.dtsi"
> #include "pm8998.dtsi"
> #include "pmi8998.dtsi"
> @@ -200,6 +202,40 @@
> firmware-name = "qcom/sdm845/adsp.mdt";
> };
>
> +
> +&wcd9340{
Here as well :)
> + pinctrl-0 = <&wcd_intr_default>;
> + pinctrl-names = "default";
> + clock-names = "extclk";
> + clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
> + reset-gpios = <&tlmm 64 0>;
> + vdd-buck-supply = <&vreg_s4a_1p8>;
> + vdd-buck-sido-supply = <&vreg_s4a_1p8>;
> + vdd-tx-supply = <&vreg_s4a_1p8>;
> + vdd-rx-supply = <&vreg_s4a_1p8>;
> + vdd-io-supply = <&vreg_s4a_1p8>;
> +
> + swm: swm@c85 {
> + left_spkr: wsa8810-left{
> + compatible = "sdw10217201000";
> + reg = <0 1>;
> + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
> + #thermal-sensor-cells = <0>;
> + sound-name-prefix = "SpkrLeft";
> + #sound-dai-cells = <0>;
> + };
> +
> + right_spkr: wsa8810-right{
> + compatible = "sdw10217201000";
> + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
> + reg = <0 2>;
> + #thermal-sensor-cells = <0>;
> + sound-name-prefix = "SpkrRight";
> + #sound-dai-cells = <0>;
> + };
> + };
> +};
> +
> &apps_rsc {
> pm8998-rpmh-regulators {
> compatible = "qcom,pm8998-rpmh-regulators";
> @@ -535,6 +571,15 @@
> function = "gpio";
> bias-pull-up;
> };
> +
> + wcd_intr_default: wcd_intr_default {
> + pins = <54>;
> + function = "gpio";
> +
> + input-enable;
> + bias-pull-down;
> + drive-strength = <2>;
> + };
> };
>
> &uart6 {
> @@ -674,3 +719,117 @@
> bias-pull-up;
> };
> };
> +
> +/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
> +&q6afedai {
> + qi2s@22 {
> + reg = <22>;
> + qcom,sd-lines = <0 1 2 3>;
> + };
> +};
> +
> +&q6asmdai {
> + dai@0 {
> + reg = <0>;
> + direction = <2>;
> + };
> +
> + dai@1 {
> + reg = <1>;
> + direction = <2>;
> + };
> +
> + dai@2 {
> + reg = <2>;
> + direction = <1>;
> + };
> +
> + dai@3 {
> + reg = <3>;
> + direction = <2>;
> + is-compress-dai;
> + };
> +};
> +
> +&sound {
> + compatible = "qcom,db845c-sndcard";
> + pinctrl-0 = <&quat_mi2s_active
> + &quat_mi2s_sd0_active
> + &quat_mi2s_sd1_active
> + &quat_mi2s_sd2_active
> + &quat_mi2s_sd3_active>;
> + pinctrl-names = "default";
> + model = "DB845c";
> + audio-routing =
> + "RX_BIAS", "MCLK",
> + "AMIC1", "MIC BIAS1",
> + "AMIC2", "MIC BIAS2",
> + "DMIC0", "MIC BIAS1",
> + "DMIC1", "MIC BIAS1",
> + "DMIC2", "MIC BIAS3",
> + "DMIC3", "MIC BIAS3",
> + "SpkrLeft IN", "SPK1 OUT",
> + "SpkrRight IN", "SPK2 OUT",
> + "MM_DL1", "MultiMedia1 Playback",
> + "MM_DL2", "MultiMedia2 Playback",
> + "MM_DL4", "MultiMedia4 Playback",
> + "MultiMedia3 Capture", "MM_UL3";
> +
> + mm1-dai-link {
> + link-name = "MultiMedia1";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
> + };
> + };
> +
> + mm2-dai-link {
> + link-name = "MultiMedia2";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
> + };
> + };
> +
> + mm3-dai-link {
> + link-name = "MultiMedia3";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
> + };
> + };
> +
> + mm4-dai-link {
> + link-name = "MultiMedia4";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
> + };
> + };
> +
> + slim-dai-link {
> + link-name = "SLIM Playback";
> + cpu {
> + sound-dai = <&q6afedai SLIMBUS_0_RX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> +
> + codec {
> + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
> + };
> + };
> +
> + slimcap-dai-link {
> + link-name = "SLIM Capture";
> + cpu {
> + sound-dai = <&q6afedai SLIMBUS_0_TX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> +
> + codec {
> + sound-dai = <&wcd9340 1>;
> + };
> + };
> +};
> --
> 2.21.0
--
~Vinod