Re: [PATCH 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's

[Andy Shevchenko]

On Fri, Mar 13, 2020 at 10:15:41AM -0400, Al Cooper wrote:
> This adds support for the XHCI, EHCI and OHCI host controllers found
> in Broadcom STB SoC's. These drivers depend on getting access to the
> new Broadcom STB USB PHY driver through a device-tree phandle and
> will fail if the driver is not available.

Hint to the future:

	scripts/get_maintainer.pl --git --git-min-percent=67 ...

> 
> Al Cooper (4):
>   dt-bindings: Add Broadcom STB USB support
>   usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
>   usb: ehci: Add new EHCI driver for Broadcom STB SoC's
>   usb: host: Add ability to build new Broadcom STB USB drivers
> 
>  .../bindings/usb/brcm,bcm7445-ehci.yaml       |  60 ++++
>  .../devicetree/bindings/usb/usb-xhci.txt      |   1 +
>  MAINTAINERS                                   |   9 +
>  drivers/usb/host/Kconfig                      |  20 ++
>  drivers/usb/host/Makefile                     |  20 +-
>  drivers/usb/host/ehci-brcm.c                  | 288 ++++++++++++++++++
>  drivers/usb/host/xhci-brcm.c                  |  16 +
>  drivers/usb/host/xhci-brcm.h                  |  16 +
>  drivers/usb/host/xhci-plat.c                  |  11 +
>  9 files changed, 435 insertions(+), 6 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
>  create mode 100644 drivers/usb/host/ehci-brcm.c
>  create mode 100644 drivers/usb/host/xhci-brcm.c
>  create mode 100644 drivers/usb/host/xhci-brcm.h
> 
> -- 
> 2.17.1
> 

-- 
With Best Regards,
Andy Shevchenko