Re: [PATCH 2/4] iio: adc: ad7476: Add IIO_CHAN_INFO_RAW for AD7091R

[Jonathan Cameron]

On Wed, 11 Mar 2020 10:43:26 +0200
Beniamin Bia <beniamin.bia@xxxxxxxxxx> wrote:

> From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
> 
> When CONVST signal is generated internally, IIO_CHAN_INFO_RAW can be
> made available for AD7091R for single reads. This patch enables it and
> makes supporting more devices by this driver easier.
> 
> Signed-off-by: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
> Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
Applied.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/ad7476.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
> index 32e857dfec9c..3b48073dd62d 100644
> --- a/drivers/iio/adc/ad7476.c
> +++ b/drivers/iio/adc/ad7476.c
> @@ -29,6 +29,8 @@ struct ad7476_state;
>  struct ad7476_chip_info {
>  	unsigned int			int_vref_uv;
>  	struct iio_chan_spec		channel[2];
> +	/* channels used when convst gpio is defined */
> +	struct iio_chan_spec		convst_channel[2];
>  	void (*reset)(struct ad7476_state *);
>  };
>  
> @@ -109,6 +111,8 @@ static int ad7476_scan_direct(struct ad7476_state *st)
>  {
>  	int ret;
>  
> +	ad7091_convst(st);
> +
>  	ret = spi_sync(st->spi, &st->msg);
>  	if (ret)
>  		return ret;
> @@ -176,6 +180,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
>  #define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \
>  		BIT(IIO_CHAN_INFO_RAW))
>  #define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0)
> +#define AD7091R_CONVST_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), \
> +		BIT(IIO_CHAN_INFO_RAW))
>  #define ADS786X_CHAN(bits) _AD7476_CHAN((bits), 12 - (bits), \
>  		BIT(IIO_CHAN_INFO_RAW))
>  
> @@ -183,6 +189,8 @@ static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
>  	[ID_AD7091R] = {
>  		.channel[0] = AD7091R_CHAN(12),
>  		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
> +		.convst_channel[0] = AD7091R_CONVST_CHAN(12),
> +		.convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
>  		.reset = ad7091_reset,
>  	},
>  	[ID_AD7276] = {
> @@ -288,6 +296,9 @@ static int ad7476_probe(struct spi_device *spi)
>  	indio_dev->channels = st->chip_info->channel;
>  	indio_dev->num_channels = 2;
>  	indio_dev->info = &ad7476_info;
> +
> +	if (st->convst_gpio && st->chip_info->convst_channel)
> +		indio_dev->channels = st->chip_info->convst_channel;
>  	/* Setup default message */
>  
>  	st->xfer.rx_buf = &st->data;