[PATCH v7] iio: adc: max1363: replace uses of mlock
From: Rohit Sarkar
Date: Sun Mar 15 2020 - 12:05:07 EST
Replace usage indio_dev's mlock with either local lock or
iio_device_claim_direct_mode.
Signed-off-by: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
---
Changelog v6 -> v7
* Fix failure handling logic
Changelog v5 -> v6
* Minor failure handling fixes
Changelog v4 -> v5
* Use local lock too at places where driver state needs to be protected.
Changelog v3 -> v4
* Fix indentation
Changelog v2 -> v3
* use iio_device_claim_direct when switching modes
* replace mlock usage in max1363_write_event_config
Changelog v1 -> v2
* Fix indentation
drivers/iio/adc/max1363.c | 37 ++++++++++++++++++++++++++++---------
1 file changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 5c2cc61b666e..12d72bf3f12a 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -150,6 +150,7 @@ struct max1363_chip_info {
* @current_mode: the scan mode of this chip
* @requestedmask: a valid requested set of channels
* @reg: supply regulator
+ * @lock lock to ensure state is consistent
* @monitor_on: whether monitor mode is enabled
* @monitor_speed: parameter corresponding to device monitor speed setting
* @mask_high: bitmask for enabled high thresholds
@@ -169,6 +170,7 @@ struct max1363_state {
const struct max1363_mode *current_mode;
u32 requestedmask;
struct regulator *reg;
+ struct mutex lock;
/* Using monitor modes and buffer at the same time is
currently not supported */
@@ -364,7 +366,13 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
struct max1363_state *st = iio_priv(indio_dev);
struct i2c_client *client = st->client;
- mutex_lock(&indio_dev->mlock);
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ mutex_lock(&st->lock);
+
+ if (ret < 0)
+ goto error_ret;
/*
* If monitor mode is enabled, the method for reading a single
* channel will have to be rather different and has not yet
@@ -372,7 +380,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
*
* Also, cannot read directly if buffered capture enabled.
*/
- if (st->monitor_on || iio_buffer_enabled(indio_dev)) {
+ if (st->monitor_on) {
ret = -EBUSY;
goto error_ret;
}
@@ -404,8 +412,10 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
data = rxbuf[0];
}
*val = data;
+
error_ret:
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
return ret;
}
@@ -705,9 +715,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,
if (!found)
return -EINVAL;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
st->monitor_speed = i;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return 0;
}
@@ -810,12 +820,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev,
int val;
int number = chan->channel;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
if (dir == IIO_EV_DIR_FALLING)
val = (1 << number) & st->mask_low;
else
val = (1 << number) & st->mask_high;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return val;
}
@@ -962,7 +972,14 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,
u16 unifiedmask;
int number = chan->channel;
- mutex_lock(&indio_dev->mlock);
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ mutex_lock(&st->lock);
+
+ if (ret < 0)
+ goto error_ret;
+
unifiedmask = st->mask_low | st->mask_high;
if (dir == IIO_EV_DIR_FALLING) {
@@ -989,7 +1006,8 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,
max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low));
error_ret:
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
return ret;
}
@@ -1587,6 +1605,7 @@ static int max1363_probe(struct i2c_client *client,
st = iio_priv(indio_dev);
+ mutex_init(&st->lock);
st->reg = devm_regulator_get(&client->dev, "vcc");
if (IS_ERR(st->reg)) {
ret = PTR_ERR(st->reg);
--
2.23.0.385.gbc12974a89