Re: [PATCH 2/3] platform/chrome: notify: Amend ACPI driver to plat

[Prashant Malani]

Hi Enric,

Thanks a lot for reviewing the patch, kindly see inline:

On Fri, Mar 13, 2020 at 01:42:26PM +0100, Enric Balletbo i Serra wrote:
> Hi Prashant,
> 
> On 12/3/20 11:08, Prashant Malani wrote:
> > Convert the ACPI driver into the equivalent platform driver, with the
> > same ACPI match table as before. This allows the device driver to access
> > the parent platform EC device and its cros_ec_device struct, which will
> > be required to communicate with the EC to pull PD Host event information
> > from it.
> > 
> > Also change the ACPI driver name to "cros-usbpd-notify-acpi" so that
> > there is no confusion between it and the "regular" platform driver on
> > platforms that have both CONFIG_ACPI and CONFIG_OF enabled.
> > 
> > Signed-off-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
> > ---
> >  drivers/platform/chrome/cros_usbpd_notify.c | 82 ++++++++++++++++++---
> >  1 file changed, 70 insertions(+), 12 deletions(-)
> > 
> > diff --git a/drivers/platform/chrome/cros_usbpd_notify.c b/drivers/platform/chrome/cros_usbpd_notify.c
> > index edcb346024b07..d2dbf7017e29c 100644
> > --- a/drivers/platform/chrome/cros_usbpd_notify.c
> > +++ b/drivers/platform/chrome/cros_usbpd_notify.c
> > @@ -12,6 +12,7 @@
> >  #include <linux/platform_device.h>
> >  
> >  #define DRV_NAME "cros-usbpd-notify"
> > +#define DRV_NAME_PLAT_ACPI "cros-usbpd-notify-acpi"
> >  #define ACPI_DRV_NAME "GOOG0003"
> >  
> >  static BLOCKING_NOTIFIER_HEAD(cros_usbpd_notifier_list);
> > @@ -54,14 +55,72 @@ EXPORT_SYMBOL_GPL(cros_usbpd_unregister_notify);
> >  
> >  #ifdef CONFIG_ACPI
> >  
> > -static int cros_usbpd_notify_add_acpi(struct acpi_device *adev)
> > +static void cros_usbpd_notify_acpi(acpi_handle device, u32 event, void *data)
> >  {
> > +	blocking_notifier_call_chain(&cros_usbpd_notifier_list, event, NULL);
> > +}
> > +
> > +static int cros_usbpd_notify_probe_acpi(struct platform_device *pdev)
> > +{
> > +	struct cros_usbpd_notify_data *pdnotify;
> > +	struct device *dev = &pdev->dev;
> > +	struct acpi_device *adev;
> > +	struct cros_ec_device *ec_dev;
> > +	acpi_status status;
> > +
> > +	adev = ACPI_COMPANION(dev);
> > +	if (!adev) {
> 
> I still missing some bits of the ACPI devices but is this possible?
> 
> The ACPI probe only will be called if there is a match so an ACPI device, I guess.
> 
Ack. Will remove this check. I was following cros_ec_lpc.c but that is a
common driver.

> > +		dev_err(dev, "No ACPI device found.\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	pdnotify = devm_kzalloc(dev, sizeof(*pdnotify), GFP_KERNEL);
> > +	if (!pdnotify)
> > +		return -ENOMEM;
> > +
> > +	/* Get the EC device pointer needed to talk to the EC. */
> > +	ec_dev = dev_get_drvdata(dev->parent);
> > +	if (!ec_dev) {
> > +		/*
> > +		 * We continue even for older devices which don't have the
> > +		 * correct device heirarchy, namely, GOOG0003 is a child
> > +		 * of GOOG0004.
> > +		 */
> > +		dev_warn(dev, "Couldn't get Chrome EC device pointer.\n");
> 
> I'm not sure this is correctly handled, see below ...
> 
> 
> > +	}
> > +
> > +	pdnotify->dev = dev;
> > +	pdnotify->ec = ec_dev;
> 
> If !ec_dev you'll assign a NULL pointer to pdnotify->ec. On the cases that
> GOOG0003 is not a child of GOOG0004 I suspect you will get a NULL dereference
> later in some other part of the code?
> 

I think there is a comment about this in the Patch 3/3 review, so will
also address it there. Basically, cros_usbpd_notify_plat() will not have
a NULL ec_dev, because the platform_probe() only happens for a cros MFD,
which will be a child of the parent EC device always.

> > +
> > +	status = acpi_install_notify_handler(adev->handle,
> > +					     ACPI_ALL_NOTIFY,
> > +					     cros_usbpd_notify_acpi,
> > +					     pdnotify);
> > +	if (ACPI_FAILURE(status)) {
> > +		dev_warn(dev, "Failed to register notify handler %08x\n",
> > +			 status);
> > +		return -EINVAL;
> > +	}
> > +
> > +	dev_info(dev, "Chrome EC PD notify device registered.\n");
> > +
> 
> This is only noise to the kernel log, remove it.

Done.
> 
> >  	return 0;
> >  }
> >  
> > -static void cros_usbpd_notify_acpi(struct acpi_device *adev, u32 event)
> > +static int cros_usbpd_notify_remove_acpi(struct platform_device *pdev)
> >  {
> > -	blocking_notifier_call_chain(&cros_usbpd_notifier_list, event, NULL);
> > +	struct device *dev = &pdev->dev;
> > +	struct acpi_device *adev = ACPI_COMPANION(dev);
> > +
> > +	if (!adev) {
> > +		dev_err(dev, "No ACPI device found.\n");
> 
> Is this possible?
> 
Ack. For ACPI probe not possible. Will remove it.
> > +		return -ENODEV;
> > +	}
> > +
> > +	acpi_remove_notify_handler(adev->handle, ACPI_ALL_NOTIFY,
> > +				   cros_usbpd_notify_acpi);
> > +
> > +	return 0;
> >  }
> >  
> >  static const struct acpi_device_id cros_usbpd_notify_acpi_device_ids[] = {
> > @@ -70,14 +129,13 @@ static const struct acpi_device_id cros_usbpd_notify_acpi_device_ids[] = {
> >  };
> >  MODULE_DEVICE_TABLE(acpi, cros_usbpd_notify_acpi_device_ids);
> >  
> > -static struct acpi_driver cros_usbpd_notify_acpi_driver = {
> > -	.name = DRV_NAME,
> > -	.class = DRV_NAME,
> > -	.ids = cros_usbpd_notify_acpi_device_ids,
> > -	.ops = {
> > -		.add = cros_usbpd_notify_add_acpi,
> > -		.notify = cros_usbpd_notify_acpi,
> > +static struct platform_driver cros_usbpd_notify_acpi_driver = {
> 
> Nice, so it is converted to a platform_driver, now. This makes me think again if
> we could just use a single platform_driver and register the acpi notifier in the
> ACPI match case and use the non-acpi notifier on the OF case.
> 
I'd like that as well. But, I'm hesitant to make the change now, since I
don't have a platform which has CONFIG_OF and CONFIG_ACPI on which to
test the common platform driver with (which is what you use IIRC).

Would something as follows work (pseudo code to follow):

static int cros_usbpd_notify_probe_plat(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct acpi_device *adev = ACPI_COMPANION(dev);

	/* "Non-ACPI case"
	if (dev->parent->of_node) {
		/* Do non-ACPI case probe work here */

	} else if (adev) {
		/* Do ACPI case probe work here */
	} else {
		return -EINVAL;
	}
}

and similarly for remove ?

If so, I can change Patch 2/2 to do this :)

Best regards,

-Prashant

> > +	.driver = {
> > +		.name = DRV_NAME_PLAT_ACPI,
> > +		.acpi_match_table = cros_usbpd_notify_acpi_device_ids,
> >  	},
> > +	.probe = cros_usbpd_notify_probe_acpi,
> > +	.remove = cros_usbpd_notify_remove_acpi,
> >  };
> >  
> >  #endif /* CONFIG_ACPI */
> > @@ -159,7 +217,7 @@ static int __init cros_usbpd_notify_init(void)
> >  		return ret;
> >  
> >  #ifdef CONFIG_ACPI
> > -	acpi_bus_register_driver(&cros_usbpd_notify_acpi_driver);
> > +	platform_driver_register(&cros_usbpd_notify_acpi_driver);
> >  #endif
> >  	return 0;
> >  }
> > @@ -167,7 +225,7 @@ static int __init cros_usbpd_notify_init(void)
> >  static void __exit cros_usbpd_notify_exit(void)
> >  {
> >  #ifdef CONFIG_ACPI
> > -	acpi_bus_unregister_driver(&cros_usbpd_notify_acpi_driver);
> > +	platform_driver_unregister(&cros_usbpd_notify_acpi_driver);
> >  #endif
> >  	platform_driver_unregister(&cros_usbpd_notify_plat_driver);
> >  }
> >