RE: [PATCH v5 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver

[Bharat Kumar Gogada]

> Subject: Re: [PATCH v5 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver
> 
> [+MarcZ, FHI]
> 
> On Tue, Feb 25, 2020 at 02:39:56PM +0000, Bharat Kumar Gogada wrote:
> 
> [...]
> 
> > > > +/* ECAM definitions */
> > > > +#define ECAM_BUS_NUM_SHIFT		20
> > > > +#define ECAM_DEV_NUM_SHIFT		12
> > >
> > > You don't need these ECAM_* defines, you can use pci_generic_ecam_ops.
> > Does this need separate ranges region for ECAM space ?
> > We have ECAM and controller space in same region.
> 
> You can create an ECAM window with pci_ecam_create where *cfgres
> represent the ECAM area, I don't get what you mean by "same region".
> 
> Do you mean "contiguous" ? Or something else ?
> 
> > > > +
> > > > +/**
> > > > + * struct xilinx_cpm_pcie_port - PCIe port information
> > > > + * @reg_base: Bridge Register Base
> > > > + * @cpm_base: CPM System Level Control and Status Register(SLCR)
> > > > +Base
> > > > + * @irq: Interrupt number
> > > > + * @root_busno: Root Bus number
> > > > + * @dev: Device pointer
> > > > + * @leg_domain: Legacy IRQ domain pointer
> > > > + * @irq_misc: Legacy and error interrupt number  */ struct
> > > > +xilinx_cpm_pcie_port {
> > > > +	void __iomem *reg_base;
> > > > +	void __iomem *cpm_base;
> > > > +	u32 irq;
> > > > +	u8 root_busno;
> > > > +	struct device *dev;
> > > > +	struct irq_domain *leg_domain;
> > > > +	int irq_misc;
> > > > +};
> > > > +
> > > > +static inline u32 pcie_read(struct xilinx_cpm_pcie_port *port,
> > > > +u32
> > > > +reg) {
> > > > +	return readl(port->reg_base + reg); }
> > > > +
> > > > +static inline void pcie_write(struct xilinx_cpm_pcie_port *port,
> > > > +			      u32 val, u32 reg)
> > > > +{
> > > > +	writel(val, port->reg_base + reg); }
> > > > +
> > > > +static inline bool cpm_pcie_link_up(struct xilinx_cpm_pcie_port
> > > > +*port) {
> > > > +	return (pcie_read(port, XILINX_CPM_PCIE_REG_PSCR) &
> > > > +		XILINX_CPM_PCIE_REG_PSCR_LNKUP) ? 1 : 0;
> > >
> > > 	u32 val = pcie_read(port, XILINX_CPM_PCIE_REG_PSCR);
> > >
> > > 	return val & XILINX_CPM_PCIE_REG_PSCR_LNKUP;
> > >
> > > And this function call is not that informative anyway - it is used
> > > just to print a log whose usefulness is questionable.
> > We need this logging information customers are using this info in case
> > of link down failure.
> 
> Out of curiosity, to do what ?
> 
> [...]
> 
> > > > +/**
> > > > + * xilinx_cpm_pcie_intx_map - Set the handler for the INTx and
> > > > +mark IRQ as valid
> > > > + * @domain: IRQ domain
> > > > + * @irq: Virtual IRQ number
> > > > + * @hwirq: HW interrupt number
> > > > + *
> > > > + * Return: Always returns 0.
> > > > + */
> > > > +static int xilinx_cpm_pcie_intx_map(struct irq_domain *domain,
> > > > +				    unsigned int irq, irq_hw_number_t hwirq) {
> > > > +	irq_set_chip_and_handler(irq, &dummy_irq_chip,
> > > > +handle_simple_irq);
> > >
> > > INTX are level IRQs, the flow handler must be handle_level_irq.
> > Accepted will change.
> > >
> > > > +	irq_set_chip_data(irq, domain->host_data);
> > > > +	irq_set_status_flags(irq, IRQ_LEVEL);
> > >
> > > The way INTX are handled in this patch is wrong. You must set-up a
> > > chained IRQ with the appropriate flow handler, current code uses an
> > > IRQ action and that's an IRQ layer violation and it goes without saying that it
> is almost certainly broken.
> > In our controller we use same irq line for controller errors and
> > legacy errors.  we have two cases here where error interrupts are
> > self-consumed by controller, and legacy interrupts are flow handled.
> > Its not INTX handling alone for this IRQ line .  So chained IRQ can be
> > used for self consumed interrupts too ?
> 
> No. In this specific case both solutions are not satisfying, we need to give it
> some thought, I will talk to Marc (CC'ed) to find the best option here going
> forward.
> 
Hi Marc,

Can you please provide yours inputs for this case.

Regards,
Bharat