[PATCH v2 1/4] regulator: bindings: add MPS mp8869 voltage regulator

[Jisheng Zhang]

From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>

The MP8869 from Monolithic Power Systems is a single output dc/dc
converter with voltage control over i2c.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
---
 .../devicetree/bindings/regulator/mp886x.txt  | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt

diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt
new file mode 100644
index 000000000000..6858e38eb47d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mp886x.txt
@@ -0,0 +1,25 @@
+Monolithic Power Systems MP8869 voltage regulator
+
+Required properties:
+- compatible: "mps,mp8869";
+- reg: I2C slave address.
+- enable-gpios: enable gpios.
+- mps,fb-voltage-divider: An array of two integers containing the resistor
+  values R1 and R2 of the feedback voltage divider in kilo ohms.
+
+Any property defined as part of the core regulator binding, defined in
+./regulator.txt, can also be used.
+
+Example:
+
+	vcpu: regulator@62 {
+		compatible = "mps,mp8869";
+		regulator-name = "vcpu";
+		regulator-min-microvolt = <700000>;
+		regulator-max-microvolt = <850000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
+		mps,fb-voltage-divider = <80 240>;
+		reg = <0x62>;
+	};
-- 
2.24.0