[PATCH v5 3/3] powerpc/powernv: Parse device tree, population of SPR support
From: Pratik Rajesh Sampat
Date: Tue Mar 17 2020 - 10:10:35 EST
Parse the device tree for nodes self-save, self-restore and populate
support for the preferred SPRs based what was advertised by the device
tree.
Signed-off-by: Pratik Rajesh Sampat <psampat@xxxxxxxxxxxxx>
Reviewed-by: Ram Pai <linuxram@xxxxxxxxxx>
---
.../bindings/powerpc/opal/power-mgt.txt | 10 +++
arch/powerpc/platforms/powernv/idle.c | 78 +++++++++++++++++++
2 files changed, 88 insertions(+)
diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
index 9d619e955576..093cb5fe3d2d 100644
--- a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
+++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
@@ -116,3 +116,13 @@ otherwise. The length of all the property arrays must be the same.
which of the fields of the PMICR are set in the corresponding
entries in ibm,cpu-idle-state-pmicr. This is an optional
property on POWER8 and is absent on POWER9.
+
+- self-restore:
+ Array of unsigned 64-bit values containing a property for sprn-mask
+ with each bit indicating the index of the supported SPR for the
+ functionality. This is an optional property for both Power8 and Power9
+
+- self-save:
+ Array of unsigned 64-bit values containing a property for sprn-mask
+ with each bit indicating the index of the supported SPR for the
+ functionality. This is an optional property for both Power8 and Power9
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 97aeb45e897b..c39111b338ff 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -1436,6 +1436,81 @@ static void __init pnv_probe_idle_states(void)
supported_cpuidle_states |= pnv_idle_states[i].flags;
}
+/*
+ * Extracts and populates the self save or restore capabilities
+ * passed from the device tree node
+ */
+static int extract_save_restore_state_dt(struct device_node *np, int type)
+{
+ int nr_sprns = 0, i, bitmask_index;
+ u64 *temp_u64;
+ u64 bit_pos;
+
+ nr_sprns = of_property_count_u64_elems(np, "sprn-bitmask");
+ if (nr_sprns <= 0)
+ return -EINVAL;
+ temp_u64 = kcalloc(nr_sprns, sizeof(u64), GFP_KERNEL);
+ if (of_property_read_u64_array(np, "sprn-bitmask",
+ temp_u64, nr_sprns)) {
+ pr_warn("cpuidle-powernv: failed to find registers in DT\n");
+ kfree(temp_u64);
+ return -EINVAL;
+ }
+ /*
+ * Populate acknowledgment of support for the sprs in the global vector
+ * gotten by the registers supplied by the firmware.
+ * The registers are in a bitmask, bit index within
+ * that specifies the SPR
+ */
+ for (i = 0; i < nr_preferred_sprs; i++) {
+ bitmask_index = BIT_WORD(preferred_sprs[i].spr);
+ bit_pos = BIT_MASK(preferred_sprs[i].spr);
+ if ((temp_u64[bitmask_index] & bit_pos) == 0) {
+ if (type == SELF_RESTORE_TYPE)
+ preferred_sprs[i].supported_mode &=
+ ~SELF_RESTORE_STRICT;
+ else
+ preferred_sprs[i].supported_mode &=
+ ~SELF_SAVE_STRICT;
+ continue;
+ }
+ if (type == SELF_RESTORE_TYPE) {
+ preferred_sprs[i].supported_mode |=
+ SELF_RESTORE_STRICT;
+ } else {
+ preferred_sprs[i].supported_mode |=
+ SELF_SAVE_STRICT;
+ }
+ }
+
+ kfree(temp_u64);
+ return 0;
+}
+
+static int pnv_parse_deepstate_dt(void)
+{
+ struct device_node *np;
+ int rc = 0, i;
+
+ /* Self restore register population */
+ np = of_find_compatible_node(NULL, NULL, "ibm,opal-self-restore");
+ if (np) {
+ rc = extract_save_restore_state_dt(np, SELF_RESTORE_TYPE);
+ if (rc != 0)
+ return rc;
+ }
+ /* Self save register population */
+ np = of_find_compatible_node(NULL, NULL, "ibm,opal-self-save");
+ if (!np) {
+ for (i = 0; i < nr_preferred_sprs; i++)
+ preferred_sprs[i].supported_mode &= ~SELF_SAVE_STRICT;
+ } else {
+ rc = extract_save_restore_state_dt(np, SELF_SAVE_TYPE);
+ }
+ of_node_put(np);
+ return rc;
+}
+
/*
* This function parses device-tree and populates all the information
* into pnv_idle_states structure. It also sets up nr_pnv_idle_states
@@ -1584,6 +1659,9 @@ static int __init pnv_init_idle_states(void)
return rc;
pnv_probe_idle_states();
+ rc = pnv_parse_deepstate_dt();
+ if (rc)
+ return rc;
if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
power7_fastsleep_workaround_entry = false;
--
2.17.1